Your task is to analyze the case titled "Sogeti's Teampark – Designing Intelligent Organizations for the Future."  Please use "The Student Guide to the Case Method" to perform this analysis. This is supposed to be an analysis, not a summary of the case. It should analyze: What is the background of the company? What is the problem they are facing? What are potential solutions? Which is the best solution and why?Your are expected to adhere to the following:

  1. Apply research in your analysis using at least two published sources for each of Steps B – D.
  2. Use APA format, 12-pt font, Times new Roman.
  3. Paper should be around 8-10 pages double-spaced including title and Bibliography
  4. Create a title page with your name, course number and name, and date submitted.
  5. Append a Bibliography page for the cited research.
  6. Use major headings that coincide with the steps outlined in Section 4 of "The Student Guide…."
  7. Apply sub-headings sparingly and for further structuring as necessary.
  8. Submit your document in Word format only, please.
  9. No plagiarism

THE STUDENT GUIDE TO THE CASE METHOD

By Laurie George Busuttil and Susan J. Van Weelden

Product # W18532

IVEY SCHOOL OF BUSINESS FOUNDATION COPYRIGHT © 2018

To order copies or request permission to reproduce materials, please contact: Ivey Publishing, Ivey School of Business Foundation

c/o Ivey Business School Western University 1255 Western Road

London, Ontario N6G 0N1 Tel: (519) 661-3208 Fax: (519) 661-3882

Email: [email protected]

Ivey School of Business Foundation prohibits any form of reproduction, storage, posting, or transmission of this material without its written permission. Reproduction of this

material is not covered under authorization by any reproduction rights organization.

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

The Student Guide to the Case Method

2

NOTE 1: UNDERSTANDING THE CASE METHOD ……………………………………………………………………….5 1. Introduction to Understanding the Case Method ……………………………………………………………………6 2. Purpose of the Case Method ………………………………………………………………………………………………6 3. Reading a Case …………………………………………………………………………………………………………………7 4. Analyzing a Case ………………………………………………………………………………………………………………7 5. Scope of the Case Guide Series ………………………………………………………………………………………….7 6. Case Analysis and Academic Integrity ………………………………………………………………………………….8

NOTE 2: PERFORMING A CASE ANALYSIS ……………………………………………………………………………..10

1. Introduction to Performing a Case Analysis …………………………………………………………………………11 2. Identify the Issues ……………………………………………………………………………………………………………11

2.1. Pay Attention to Questions …………………………………………………………………………………………11 2.2. Distinguish Symptoms from Issues ………………………………………………………………………………12 2.3. Limit Issues to a Manageable Set ………………………………………………………………………………..12

3. Analyze the Issues …………………………………………………………………………………………………………..12 3.1. Use Case Facts …………………………………………………………………………………………………………13 3.2. Use Business Concepts, Models, and Tools …………………………………………………………………13 3.3. Use Outside Research Sparingly …………………………………………………………………………………13

4. Develop and Evaluate the Alternatives ……………………………………………………………………………….13 4.1. Develop Alternative Solutions ……………………………………………………………………………………..14 4.2. Evaluate the Alternative Solutions ……………………………………………………………………………….14 4.3. Use Case Facts and Business Concepts, Models, and Theories to Evaluate the Alternatives ………………………………………………………………………………………………………………15

5. Recommendations …………………………………………………………………………………………………………..16 5.1. Apply Criteria for Making Sound Recommendations ………………………………………………………16 5.2. Craft Your Recommendations ……………………………………………………………………………………..16 5.3. Base Your Recommendation on the Information You Have …………………………………………….16 5.4. Evaluate Your Recommendations ……………………………………………………………………………….17

6. Variations on performing a Full Case Analysis …………………………………………………………………….17 6.1. Analytical Cases ………………………………………………………………………………………………………..17 6.2. Partial Case Analysis …………………………………………………………………………………………………17

NOTE 3: PREPARING TO DISCUSS A CASE ……………………………………………………………………………..18

1. Introduction to Preparing to Discuss a Case in Class ……………………………………………………………19 2. Prepare before Class ……………………………………………………………………………………………………….19 3. Contribute to In-Class Discussion ………………………………………………………………………………………19 4. Listen to others in Class ……………………………………………………………………………………………………20

4.1. Use Active Listening Techniques …………………………………………………………………………………20 4.2. Use Listening Etiquette ………………………………………………………………………………………………21

5. Enhance the Quality of Your Class Participation ………………………………………………………………….21 NOTE 4: PREPARING A WRITTEN CASE REPORT ……………………………………………………………………22

1. Introduction to Preparing a Written Case Report ………………………………………………………………….23 2. Play Your Assigned Role ………………………………………………………………………………………………….23 3. Identify the Issues ……………………………………………………………………………………………………………23

3.1. Be Clear …………………………………………………………………………………………………………………..23 3.2. Settle on a Manageable Set of Issues ………………………………………………………………………….24 3.3. Use Your Issue Statement to Let the Reader Know What to Expect ………………………………..24

4. Analyze the Issues …………………………………………………………………………………………………………..25 4.1. Test the Case Facts …………………………………………………………………………………………………..25 4.2. Use Business Concepts ……………………………………………………………………………………………..25 4.3. Use External Research Sparingly ………………………………………………………………………………..26 4.4. Adhere to Length Constraints ……………………………………………………………………………………..26

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

The Student Guide to the Case Method

3

5. Develop and Evaluate Your Alternatives……………………………………………………………………………..26 6. Make Recommendations ………………………………………………………………………………………………….27 7. Content and Format of your Report ……………………………………………………………………………………27

7.1. Length ……………………………………………………………………………………………………………………..27 7.2. Font …………………………………………………………………………………………………………………………27 7.3. Spacing ……………………………………………………………………………………………………………………28 7.4. Page Numbers ………………………………………………………………………………………………………….28 7.5. Headings and Subheadings ………………………………………………………………………………………..28 7.6. Cover Page ………………………………………………………………………………………………………………28 7.7. Executive Summary …………………………………………………………………………………………………..28 7.8. Introduction ………………………………………………………………………………………………………………29 7.9. Body of the Report …………………………………………………………………………………………………….29 7.10. Conclusion …………………………………………………………………………………………………………….29 7.11. Figures and Appendices ………………………………………………………………………………………….29

7.11.1. The Purpose of Figures and Appendices……………………………………………………29 7.11.2. Quantitative Figures and Appendices……………………………….……………………….30 7.11.3. Numbering of Figures and Appendices……………………………………….……………..30

8. Writing Style, Grammar, and Spelling …………………………………………………………………………………31 8.1. Basic Criteria of a Well-Written Report …………………………………………………………………………31 8.2. Use of “I Think” and “I Believe” ……………………………………………………………………………………31 8.3. Formal versus Informal Reports …………………………………………………………………………………..31

9. Professional Language, Tone, and Tact ……………………………………………………………………………..32 9.1. Use Professional Language ………………………………………………………………………………………..32 9.2. Use Constructive Language ………………………………………………………………………………………..33 9.3. Use Must and Need Sparingly …………………………………………………………………………………….33

10. Case Reports Written by Teams …………………………………………………………………………………….33 10.1. Team Meetings ………………………………………………………………………………………………………33 10.2. Brainstorming ………………………………………………………………………………………………………..34 10.3. The Task of Writing the Report ………………………………………………………………………………..34

11. Case Analysis and Academic Integrity …………………………………………………………………………….34 NOTE 5: MAKING AN ORAL CASE PRESENTATION …………………………………………………………………35

1. Introduction to Making An Oral Case Presentation ……………………………………………………………….36 2. Purpose of a Case Presentation ………………………………………………………………………………………..36 3. Criteria of a Good Presentation ………………………………………………………………………………………….36 4. Content of a Case Presentation …………………………………………………………………………………………37

4.1. Presentation of a Full Case Report ………………………………………………………………………………37 4.2. Presentation without a Case Report …………………………………………………………………………….37

5. Audiovisual Aids ………………………………………………………………………………………………………………38 6. Presentation Skills ……………………………………………………………………………………………………………38 7. Handling Audience Questions ……………………………………………………………………………………………39 8. Team Presentations …………………………………………………………………………………………………………39 9. Role Of The Audience ………………………………………………………………………………………………………40 10. Dress for Success …………………………………………………………………………………………………………40

NOTE 6: PREPARING FOR AND WRITING A CASE EXAM …………………………………………………………41

1. Introduction to Writing a Case Exam …………………………………………………………………………………..42 2. Purpose of a Case Exam ………………………………………………………………………………………………….42 3. Preparing for a Case Exam ……………………………………………………………………………………………….42

3.1. Reread Notes and Texts …………………………………………………………………………………………….42 3.2. Practise Writing a Case under Exam Conditions ……………………………………………………………43

4. Writing a Case Exam ………………………………………………………………………………………………………..43 4.1. Read the Instructions …………………………………………………………………………………………………43 4.2. Read the Case ………………………………………………………………………………………………………….44

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

The Student Guide to the Case Method

4

4.3. Prepare an Outline …………………………………………………………………………………………………….44 4.4. Write Your Report ……………………………………………………………………………………………………..45

4.4.1. Prioritize and Manage Your Time……………………………………………………………..45 4.4.2. Identify the Issues…………………………….…………………………………………………45 4.4.3. Analyze the Issues……………………………………………………………………………..45 4.4.4. Identify Alternative Solutions…………………………………….……………………………45 4.4.5. Evaluate Alternative Solutions………………………..………………………………………45 4.4.6. Make Your Recommendation………………………………………………..……………….46 NOTE 7: USING COMMON TOOLS FOR CASE ANALYSIS …………………………………………………………47

1. Introduction to Common Tools for Case Analysis………………………………….….…………….48 2. Horizontal Analysis………………………………………………………………………………………48 3. Vertical Analysis…………………………………………………………………………………………49 4. Ratio Analysis……………………………………………………………………………..……………..49

4.1 Profitability or Activity Ratios………………………………………………………………………50 4.1.1 Return on Assets……………………………………………………………………………….50 4.1.2 Profit Margin…………………………………………………………………….………………50 4.1.3 Gross Profit Margin…………………………………………………………………………….51 4.1.4 Expense Ratios……………………………………………………………………….………..51 4.1.5 Asset Turnover…………………………………………………………………………………51 4.1.6 Inventory Turnover………………………………………………………………………..……51 4.1.7 Receivables Turnover………………………………………………………………………….52 4.1.8 Return on Equity………………………………………………………………………………..52 4.1.9 Earnings per Share……………………………………………………………………………..53 4.1.10 Price-Earnings Ratio………………………………………………………………………..….53

4.2 Liquidity Ratios………………………………………………………………………………………53 4.2.1 Current Ratio ……………………………………………………………………………..……53 4.2.2 Acid Test Ratio (Quick Ratio)……………………………………………………………..….54

4.3 Solvency Ratios…………………………………………………………………………………..…54 4.3.1 Debt Ratio…………………………………………………………………….…………………54 4.3.2 Debt to Equity Ratio………………………………………………………….…..…………….55 4.3.3 Times Interest Earned……………………………………………………….…….…………..55

5. Assessing Profitability………………………………………………………………….…….………….55 6. Break-Even Analysis…………………………………………………………………….………………56 7. Market Potential and Market Share…………………………………………………….…….………..56 8. SWOT Analysis…………………………………………………………………………….…………….57 9. PESTLE Analysis………………………………………………………………………………………..57 10. Porter’s Five Forces Framework………………………………………………………………….……58 11. Stakeholder Analysis………………………………………………………………………………..…..60 12. Industry Success Factors……………………………………………………………………………….60 13. Value Chain Analysis………………………………………………………………………………..…..60

13.1. Industry Value Chain………………………………………………………………………………60 13.2. Organizational Value Chain…………………………………………………………………..…..61

14. Competitive Position Matrix……………………………………………………………………………..61 15. Strategic Cluster Map………………………………………………………………………………..….62 16. Resource Gap Analysis…………………………………………………………………………………62 17. Core Competencies………………………………………………………………………….…………..63 18. Competitive Advantage Analysis VRIO………………………………………………………………..63 19. Case Analysis and Academic Integrity……………………………………………………………………………..64

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

The Student Guide to the Case Method

5

NOTE 1: UNDERSTANDING THE CASE METHOD

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

The Student Guide to the Case Method

6

A case or case study is a real business story that requires you to step into the role of a manager or a member of the management team that faces a dilemma, or the role of a consultant assisting an organization that faces a dilemma. Acting in that role, you are tasked with resolving the issues or problems that the profiled organization is facing at a particular moment in time. Alternatively, you are asked to evaluate and choose among opportunities that exist for the organization at a specific point in time. Those issues and opportunities may be confined to a specific discipline in business, such as accounting, marketing, human resources, or strategic management. However, the challenges often involve several disciplines, reflecting the multi-faceted nature of business in practice. The case method involves learning by doing. It provides you with an opportunity to apply your knowledge and skills to real-life and realistic situations. Listening to class lectures, reading about various business subjects, and performing quantitative and qualitative analyses to solve well-defined problems are all valuable learning tools; however, management skills and knowledge cannot be developed by these methods alone. Management requires more than applying a storehouse of prepackaged solutions or standard answers. Each situation faced by management has its own variables unique to the situation. Using the case method provides you with valuable opportunities to develop and practise skills you will need in those situations. 1. INTRODUCTION TO UNDERSTANDING THE CASE METHOD This note introduces you to the case method. It provides an overview of the steps used in case analysis and the types of case assignments you might encounter. It is designed to help you develop a basic understanding of the case method and to guide you in approaching your first few cases. Subsequent notes provide more detailed guidance about individual steps in the process. 2. PURPOSE OF THE CASE METHOD Case analysis is used as a teaching and learning tool to practise the art and science of management. The situations described in cases are less structured than the typical problems and questions found in most textbooks. There is not necessarily one right answer to resolving the issues, problems, or opportunities (collectively referred to hereafter as “issues”) faced by the organization in the case. While some answers could be better than others, there is no answer key at the back of the book to tell you whether you have made the right choices. The organization described in the case might be familiar to you, and you might even be able to find out what the organization actually did in the situation described in the case; however, the approach taken by the organization is not necessarily the one you should recommend. Also, because cases describe relatively current or recent situations, enough time might not have passed since the decision point in the case to allow you—or others in the business world—to evaluate whether the organization made the best possible choices. You are asked to draw your own conclusions and support them with your own analysis. Learning with the case method will help you develop essential management competencies, skills, and abilities. You will use technical, analytical, problem-solving, and creative skills. You will hone your written and oral communication skills by writing reports, participating in class discussions, and making presentations. You will develop your ability to work effectively with others by preparing team case reports and presentations. Along the way, you will learn about a wide variety of industries, organizations, and management issues.

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

The Student Guide to the Case Method

7

3. READING A CASE Before reading the case itself, read the course requirements in the syllabus or on the course website. In addition to understanding the general purpose of the case method, it helps to know what your instructor wants you to do with the case—prepare for a class, answer questions, perform a complete analysis, prepare a written report or presentation, or undertake some combination of those tasks. When you read the case for the first time, resist the temptation to highlight important facts and to begin doing analysis and generating alternative solutions. If you use a highlighter on the first read, you will soon find yourself highlighting most of the case, especially in a short case that is rich in details. Instead, during the initial read, establish who the decision maker is and what decision needs to be made. Highlight any questions raised by the principal actors or characters: they usually indicate what work is expected (e.g., answers to specific questions, specific types of analysis, or evaluation of specific alternatives). Identify key goals of the organization, industry key success factors (if they are made explicit), and important constraints (e.g., the urgency of a decision, or the lack of resources or expertise). Develop a preliminary understanding of the issues facing the decision maker. Then read the case more carefully a second time. Armed with an initial understanding of the issues, you are now prepared to assess the relevance and importance of specific case facts. Highlighting the case facts at this stage will help you to be able to quickly extract them and use them effectively in your analysis. During your second read of the case, you can also gain a better understanding of the issues and begin to consider what analysis to perform with the case facts you have identified as relevant and important. Subsequent reads of the case will likely be confined to rereading specific sections of the case as you undertake the analysis described briefly in Section 3 and described in more detail in Note 2 of the Case Guide Series—“Performing a Case Analysis,” No. 9B18M054.

4. ANALYZING A CASE

Over the course of your business studies, you will face a variety of cases. Most of the cases will be in written format, but cases can also be provided as videos. The length of cases will vary, as will the breadth and complexity of issues they cover. As well, some cases will direct and limit the scope of your analysis, while other cases will pose general questions that require a more skilled approach to case analysis.

Regardless of the size and scope of the case, case analysis involves four basic steps:

A. Identify the issues, problems, and opportunities. B. Analyze the issues, problems, and opportunities. C. Develop and evaluate alternative solutions. D. Make recommendations for action.

Especially for complex cases, a case analysis is usually an iterative process. While an essential first step is to identify the issues to be resolved, analysis of those issues can refine the issues that were initially identified, leading to a revised issue statement.

5. SCOPE OF THE CASE GUIDE SERIES

This note and others in the Case Guide Series are designed to provide an overview of the case method. They provide a general template or pattern for case analysis that you can apply in various courses throughout your business studies. There is no one right way to analyze a case, just as there is no one right answer or solution to the issues presented in a case. You will encounter a variety of situations, issues, tasks, and topics that all require you to use judgment in applying the guidelines provided in the Case Guide Series.

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

The Student Guide to the Case Method

8

The Case Guide Series covers five separate tasks that can form part of your case assignments. Case analysis: For all case assignments, you will be required to analyze the case by performing one or more of the steps described in Section 3 (i.e., identify the issues, analyze the issues, develop and evaluate alternatives, and recommend a course of action). Analyze, in the broad sense, refers to the full process of applying the case method. Analyze can also specifically refer to the case analysis step of probing into and dissecting issues. In both contexts, analysis is a critical component of the case method, so it is discussed first and receives the most attention. (See Note 2—“Performing a Case Analysis,” No. 9B18M054, and Note 7—“Common Tools for Case Analysis”, No. 9B18M059.) Class discussion: In some courses, instructors will use discussion of the case to apply and supplement the lecture material; in other courses, instructors will use discussion of the case as the main pedagogical tool. To benefit from the discussion and to provide meaningful input, it is important to adequately prepare. (See Note 3—“Preparing to Discuss a Case,” No. 9B18M055.) Report writing: You could be asked to prepare a written case report—either individually or as part of a small team. For this task, the emphasis is on organizing your analysis and findings in a written report that effectively communicates those findings to the reader. In most instances, you will be asked to play a specific role (e.g., the internal manager who is the decision maker in the case or an external consultant to that decision maker), and to write a report to a specific reader or group of readers (e.g., the vice-president of marketing or the board of directors). (See Note 4—“Preparing a Written Case Report,” No. 9B18M056.) Oral presentation: You could be asked to present your analysis and findings to the class, either individually or as part of a small team. The goal in this exercise is to develop and deliver a concise presentation that captures the main thrusts of your analysis and presents them in a professional and engaging manner. Here, too, you will usually be asked to play a specific role and to present to a specific target audience. (See Note 5—“Making an Oral Case Presentation,” No. 9B18M057.) Case exam: Your instructor might use the case method as a testing or examination tool. The goal in this situation is to showcase your analytical and writing skills under the time pressure of an exam setting. It will be important to read the case intentionally so that you can isolate relevant facts and data, identify issues, decide on the appropriate qualitative and quantitative analytical tools to use, and perform the necessary analysis. Time management will be crucial so that you can complete all required steps, including providing appropriate recommendations and a plan for their implementation. (See Note 6—“Preparing for and Writing a Case Exam,” No. 9B18M058.) When completing any of the above tasks, follow the specific instructions provided by your instructor in the course syllabus or course package. These specific instructions always supersede those contained in the Case Guide Series. Different instructors have differing expectations, which is good practice for the workplace, where you will need to give careful consideration to the preferences of your supervisor or client—in terms of both content and style.

6. CASE ANALYSIS AND ACADEMIC INTEGRITY

Because case analysis is complex, it may often seem helpful to discuss the case informally or formally with other students before participating in a class discussion, writing a report, or making a presentation. Managers and consultants often discuss problems with other people, within the constraints allowed by confidentiality. Therefore, your instructor may allow, encourage, or even require such discussion. However, to ensure academic integrity and to avoid plagiarism, unless your instructor has specifically indicated that some degree of discussion is permissible, you should consult with your instructor before engaging in any collaboration. This restriction on outside discussion is especially necessary when preparing reports and presentations.

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

The Student Guide to the Case Method

9

It may also seem helpful to search the Internet for teaching notes for cases or for case reports or slide presentations prepared by other students. Academic integrity requires that you refrain from using such resources, in full or in part. Any attempt to use the work of others and to pass it off as your own is plagiarism. If the instructor is suspicious that plagiarism might be involved, you may be asked to upload a copy of your case report through Turnitin.com. While using the work of others may appear to provide a shortcut to a good grade, the quality of online sources and the work of other students is often suspect, at best. Most importantly, you deprive yourself of the learning opportunities the case method offers.

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

The Student Guide to the Case Method

10

NOTE 2: PERFORMING A CASE ANALYSIS

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

The Student Guide to the Case Method

11

1. INTRODUCTION TO PERFORMING A CASE ANALYSIS For all case assignments, you will be required to analyze the case by performing one or more of the basic steps of analysis (i.e., identify the issues, analyze the issues, develop and evaluate alternative solutions, and recommend a course of action). Analyze, in the broad sense, refers to the full process of applying the case method. Analyze can also specifically refer to the case analysis step of probing into and dissecting issues. In both contexts, analysis is a critical component of the case method. This note of the Case Guide Series guides you through the specific process of analyzing a case. This method for basic case analysis can be used for several purposes: discussing the case in class, writing a report, making a presentation, and writing a case exam. 2. IDENTIFY THE ISSUES The first step in analyzing the case is to identify the organization’s issues, problems, and opportunities (collectively referred to hereafter as “issues”) that you will attempt to resolve. A clear understanding of the issues is paramount; otherwise, your analysis and your generation of alternative solutions will lack the necessary focus. Although some cases will direct your attention toward specific issues (especially early in your business studies), a considerable degree of judgment is usually required to identify the issues. 2.1. Pay Attention to Questions Questions from three sources provide important clues about the key issues:  The principal actors or characters in the case. These clues are musings or direct questions raised by

the principal actors themselves. You can usually find these clues at the beginning and end of the case, but they might also be sprinkled throughout the case.

 Your instructor. Questions can often be found in the syllabus or course package, or on the course website. These questions are sometimes intended to limit your analysis to issues that fit within a specific topic of discussion. At other times, these questions are intended to focus your attention on the most important issues.

 The author of the case. In cases presented in textbooks, the case author sometimes provides attention- directing questions at the end of the case.

If, in your analysis of the case, you have not answered all of the questions posed in the case or in your course syllabus, you have likely either omitted an important issue or become sidetracked by minor issues. Moreover, even if you have resolved some issues, if you have not addressed all of the questions posed in the case or in your course syllabus, your analysis will likely fail to totally satisfy your instructor—and later, your supervisor or client. Especially in upper-level courses where the cases are, in general, more complex, your instructor could expect you to look beyond the more obvious issues or those suggested by the case principals to consider issues that people close to the situation could have overlooked. You should address these supplementary issues in addition to, not instead of, addressing the specific requests posed by principals in the case or by your instructor.

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

The Student Guide to the Case Method

12

2.2. Distinguish Symptoms from Issues To correctly identify issues, it is important to distinguish between symptoms and underlying causes. Your goal should be to focus on the underlying causes. To uncover them, ask the question “Why?” until you can no longer provide a satisfactory answer. For instance, an organization might be suffering from low productivity. Asking why productivity is low might lead you to conclude that employee morale is low and that employees are not motivated to perform well. Probing further, you might find that both of these issues arise because the reward system does not adequately recognize good performance. Low productivity and employee morale are symptoms of the underlying cause. Alternatively, an organization might be plagued by low customer retention. Asking why customers are going elsewhere might lead you to conclude that customer service is poor, product defect rates are high, existing competitors have improved their product, and a new competitor has entered the market. The last two items are root causes because asking “why” will not lead to further answers. Therefore, they are issues to resolve even though they are not within the organization’s control. Asking “why” for the first two items might lead you to the third issue, namely that the company’s goals and reward systems emphasize efficiency rather than product quality. 2.3. Limit Issues to a Manageable Set Once you have identified the issues, you might need to reduce them to a manageable size to enable you to effectively carry out the subsequent steps in case analysis. For some cases, you might be required to resolve a single issue. However, you should still identify sub-issues, and decide which are most important and which you have the time and space to tackle. For example, the issue might be to set an admission price for a new museum. Possible sub-issues to consider include fit with the mission of the museum, customers’ ability and willingness to pay, the possibility of differential pricing (e.g., lower rates for students), competing forms of entertainment and their admission prices, costs that need to be covered by the admission price, and the break-even point. To identify the most important sub-issues, consider the information in the case, the questions discussed in Section 2.1, and the nature of the course. Other cases might present multiple issues. You might find it helpful to look for relationships among the issues and cluster them under one overarching issue. For instance, in an organizational behaviour case, you might be able to trace several issues—such as unclear decision making processes, inability to deal with job stresses, and inability to delegate—to the root issue of inadequate training of managers. Dealing with one issue is easier than dealing with three separate issues and will lead to better solutions. Other cases might not have an overarching issue; instead, you might face a seemingly unconnected set of distinct issues. You will then need to prioritize the issues, using the questions referred to in Section 2.1, and your judgment, so that you give adequate time and attention to the most important issues. 3. ANALYZE THE ISSUES Analysis involves examining the issues in detail. It requires that you dissect the issues and consider them closely to understand their nature and key elements.

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

The Student Guide to the Case Method

13

3.1. Use Case Facts One aspect of analysis is using case facts to develop a detailed understanding of the issues. You can use the case facts to help build logical arguments, develop findings, and draw educated inferences rather than casual guesses. For instance, if the issue in an organizational behaviour case is inadequate managerial training, facts from the case should indicate that the training provided to managers did not sufficiently clarify decision making processes or how to delegate tasks, or both. Or, for a marketing case, an issue with increased competition might be supported by the case facts describing the entrance of new competitors into the market, new products introduced by competitors, or price reductions offered by competitors. Many important case facts are contained in a case’s figures and exhibits. These case facts could include data about the worldwide market size, the competition, the company’s revenues and profit, industry sales, product prices, or organizational charts. Study each figure or exhibit to determine the key insights it offers. Go beyond the specific facts highlighted in the body of the case; figures and exhibits usually include additional facts that can be interpreted in other ways to enhance your analysis.

3.2. Use Business Concepts, Models, and Tools Another aspect of analysis is the use of business concepts, models, and tools to analyze the issues. For example, in an organizational behaviour case, you could use equity theory or expectancy theory to explain why an organization’s reward system has been unsuccessful in motivating employees. In a marketing case, you could apply the model of a product life cycle or the concept of a target market; you could also calculate market share and changes in market share. To analyze issues in an accounting case, you could use tools such as contribution margin analysis or capital budgeting. In an integrated strategic management case, you might apply the concepts of value chain and competitive advantage, compute financial ratios, and apply tools such as a competitive position matrix and Porter’s five forces framework. You will sometimes be given directions to apply specific concepts or tools; other times, you are expected to use your discretion in selecting the most relevant concepts or tools to apply. For some cases, the analysis will largely rely on qualitative models and tools. However, many cases will involve both qualitative and quantitative elements. Note 7 of the Case Guide Series—“Using Common Tools for Case Analysis,” No. 9B18M059—describes some common qualitative and quantitative tools for analyzing issues and possible courses of action. 3.3. Use Outside Research Sparingly Analysis might also include conducting and integrating outside research—for example, researching the industry and competitors—to supplement the information provided in the case. However, for many cases you will encounter in your studies, you will not be asked to obtain outside research beyond any background knowledge required to understand the facts of the case. This approach is consistent with the requirement that you put yourself in the role of either the manager or a member of the management team making the decision. You are asked to make that decision based on the same information the actual managers in the actual organization had at that actual point in time. 4. DEVELOP AND EVALUATE THE ALTERNATIVES In this step of a case analysis, you first identify alternative solutions to address the issues you previously identified and analyzed, and then evaluate the advantages and disadvantages of each alternative. The best alternatives will resolve more than one of the identified issues.

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

The Student Guide to the Case Method

14

4.1. Develop Alternative Solutions When identifying alternative solutions, go beyond the status quo (which might or might not be a viable solution, depending on the company’s situation) and beyond identifying a poor alternative and a very good one. Strive to develop multiple viable alternatives that are not chosen with a bias toward or against a particular course of action. Creative thinking will enable you to develop novel approaches. Avoid a premature evaluation of the alternatives, and try to develop as many alternatives as possible. Even if you know the course of action the organization ultimately chose, resist the temptation for that knowledge to bias your development and evaluation of alternatives. This topic is further discussed in Section 5.3. 4.2. Evaluate the Alternative Solutions Assessing the advantages and disadvantages of each alternative solution represents another form of analysis, as is quantifying the financial impact of an alternative solution. Some of the case analysis tools described in Note 7 can be used to analyze alternative solutions, in addition to being used to analyze issues. When you evaluate your alternatives, present a balanced assessment of both the advantages (pros) and disadvantages (cons). Use of biased or one-sided arguments undermines both the usefulness of your analysis and its credibility. Where possible, suggest how to overcome any significant disadvantages. If you have difficulty generating pros and cons, establish a set of criteria for decision making and use those criteria to identify pros and cons. For example, in a strategic management case, decision criteria might include the degree to which the action  fits with the organization’s mission, value proposition, and goals;  fits with stakeholder preferences;  is profitable;  increases market share;  enhances the organization’s brand;  capitalizes on specific external opportunities;  helps to mitigate external threats;  uses internal strengths;  avoids or mitigates internal weaknesses;  builds on an existing competitive advantage or helps to create a competitive advantage;  requires additional resources and competencies;  can be accomplished within the organization’s existing structure; or  mitigates or increases risks, including environmental and reputational risks. The principal in the case or the questions in your syllabus or course pack might have alerted you to some of the decision criteria to be applied. If so, be sure to use those as your starting point in establishing a set of decision criteria. Measuring alternatives against decision criteria also helps to keep the analysis consistent, reducing bias. For instance, by applying the criteria, you avoid citing a loss of market share as a disadvantage of one alternative but overlooking the same disadvantage in another alternative that is your implicit favourite. When identifying pros and cons, be as specific as possible. For instance, instead of stating that an alternative will be unprofitable, indicate that the alternative will result in net losses of $72,800 and $52,500

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

The Student Guide to the Case Method

15

in years one and two, respectively. Instead of claiming that an alternative will increase market share, indicate that it will increase market share by an estimated three to four per cent by year five. Rather than arguing that an alternative will capitalize on an organization’s strengths, indicate the specific strengths that will be capitalized on and how they will be leveraged. When working with financial measures, if you can incorporate all of the information about revenues and costs into a profitability measure, it is unnecessary to then itemize individual revenues or expenses as pros and cons. Doing so would be redundant and is not nearly as valuable as doing the financial analysis required to determine profitability. Your evaluation of alternatives should also go beyond obvious disadvantages such as being “costly” or “time-consuming.” A costly alternative might still be highly advisable, especially if it generates sufficient advantages. Almost all courses of action involve some cost and time, so clearly distinguish how these factors vary from one alternative to the next and, when possible, provide evidence. For instance, one potential product line might require a significant push by the sales department to make it successful, whereas another might not require as much effort because it fits better with the organization’s existing product lines and target market. Once you begin to evaluate your alternatives, you will probably be able to quickly discard a few alternatives after some preliminary analysis. For instance, in a strategic management case, one alternative could lie far outside the organization’s existing competencies and contradict one or more of the organization’s clearly stated goals. Discarding one or more unsuitable alternatives will allow you to focus your detailed analysis on the more feasible and more helpful alternatives. Nonetheless, some preliminary analysis is important to ensure that you do not rule out options too quickly as a result of your own biases. It can sometimes seem expedient to group a few alternative solutions and evaluate them as a package. However, evaluating combined alternatives can be difficult because each component usually has its own pros and cons. Also, evaluating packaged alternative solutions often obscures some of the issues, resulting in an evaluation that is less thorough than if each alternative had been evaluated separately. Therefore, it is usually preferable to wait until the recommendation phase to combine alternatives. 4.3. Use Case Facts and Business Concepts, Models, and Theories to Evaluate the

Alternatives When evaluating alternative solutions, you will have another opportunity to introduce key facts from the case and to apply concepts, models, and theories from the course to support your analysis. Some of those concepts and models will tie directly to the decision criteria referred to in Section 4.2. For instance, in a strategic management case, alternatives can be evaluated by assessing their fit with stakeholders’ preferences and by identifying resource gaps that would need to be filled to implement each option. In an organizational behaviour case, if negative group norms are an issue, you could use theory to propose ways to build positive norms, such as rewarding desired behaviour and providing feedback about unacceptable behaviours. In a human resource case, you could evaluate alternative ways to recruit new managers by considering the theoretical pros and cons of various recruitment techniques and assessing their prospects for success, given the company’s specific needs and circumstances. In a finance case, solutions could be evaluated against the company’s required rate of return or payback period. In a marketing case, you could demonstrate how a proposed product is designed to meet the needs of the firm’s current target market or how its short development time would allow the firm to begin selling the product before its competitors do.

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

The Student Guide to the Case Method

16

The examples in the preceding paragraph illustrate that the evaluation of alternative solutions usually involves some additional analysis. The analysis of the issues and of the alternative solutions should fit together; the concepts, models, and theories used to analyze the issues should be consistent with those used to evaluate alternative solutions. The goal in both exercises is to provide analyses that demonstrate sound argument and logic, and are supported by careful use of the case facts and appropriate analytical techniques (some of which are described in Note 7).

5. RECOMMENDATIONS 5.1. Apply Criteria for Making Sound Recommendations The last step of case analysis is to choose your recommended solution to the issues. Your recommended solution will often consist of a combination of alternatives because issues are usually not so simple that a single solution will suffice. Your goal is to develop recommendations that are useful, given the issues that you are trying to resolve; consistent with your analysis; reasonable, given the organization and its environment; feasible, given the organization’s resources; and convincing to your reader. Articulate the decision criteria (e.g., those listed in Section 4.2) that you have established and applied in developing your recommendations. If the principal in the case has established the decision criteria, your recommendations should explicitly address how your recommended solution meets those criteria. 5.2. Craft Your Recommendations Your recommendations should include sufficient operational-level details to enable their implementation. For example, specify who should implement the recommendations, how, when, and in what priority. You might want to develop a more complete implementation plan and attach it to your report as an appendix, after briefly referring to the plan in the body of the report. This approach helps to build a convincing, persuasive argument for your recommendations. If you are specifically asked to design a separate implementation plan, your recommendations will be more general, and the details regarding who, how, when, and in what priority will be included in the implementation plan. Your recommendations should address all the issues you identified, and should be both supported by and consistent with your analysis. Where appropriate, demonstrate how and why your recommendations would be acceptable to key individuals in the organization. Ensure that the organization is financially able to implement the action plan and has the expertise, time, and other organizational resources necessary to do so. 5.3. Base Your Recommendation on the Information You Have Avoid recommending that further information be obtained or that additional analysis be completed. Instead, base your recommendation on the information you have, even if you believe more information is needed. Managers rarely have all of the information they desire. If further analysis is absolutely essential, your recommendation should specifically state what should be done, why, and by whom. If the assigned case study is based on actual events, you might already know the course of action that management chose, or you might be able to obtain this information through further research. Resist the temptation to recommend this alternative, which assumes that management made the best decision. Base your recommendation on the information that management had at the time it faced the decision and on the analysis that you conduct. Only time allows us to evaluate the effectiveness of an organization’s actual

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

The Student Guide to the Case Method

17

chosen course of action. Even years later, we might not know whether outcomes would have been better for the organization had another alternative been chosen.

5.4. Evaluate Your Recommendations

Before finalizing your recommendations, take time to evaluate your recommended solution by asking the following key questions:

 Does the recommended solution address the issues identified in the analysis?  Is there theoretical support for the solution?  Does the recommendation address the pros and cons identified when you evaluated the alternative solution?  Does the recommendation suggest how to mitigate or overcome the most critical disadvantages,

including any risks posed to the organization?  Does the recommended solution meet organizational goals?  Is the recommended solution financially viable? Is it feasible from a resource perspective?  Is the recommended solution acceptable to various stakeholders of the organization (e.g., management,

employees, shareholders, and customers)?  Does the recommendation provide sufficient details to enable the organization to implement it?

Being able to answer these questions affirmatively will help your recommendations meet the key criteria of being useful, consistent, reasonable, feasible, and convincing.

6. VARIATIONS ON PERFORMING A FULL CASE ANALYSIS

The basic four steps (identify the issues, analyze the issues, develop and evaluate alternative solutions, and recommend a course of action) are required for a full case analysis. This section discusses two variations to a full case analysis: analytical cases and partial case analysis.

6.1. Analytical Cases

Some cases might not describe the issues to be resolved but might, instead, describe issues either in the context of a success story or in a situation where it is too late to resolve the issues. In such cases, the focus is on analyzing what can be learned from the organization’s successes or failures so that future prospects for success can be enhanced, or similar predicaments can be avoided or better handled by either the organization in the case or others. Business concepts, models, and tools should still be applied. For example, the leadership of an organization could be analyzed to identify which styles of leadership were evident and their effectiveness in the circumstances described in the case. Alternatively, a corporate initiative might be analyzed to determine its effectiveness in addressing resistance to change and its application of other change management principles.

6.2. Partial Case Analysis

Due to time or space constraints, your instructor might require only a partial case analysis. For example, you might be asked to focus only on identifying and analyzing the issues. Alternatively, the case might clearly define the issues, and you might be asked to only identify and evaluate possible alternative courses of action. Another form of partial case analysis is a “directed case,” in which you are directed to answer a specific set of questions about the case. Even though a full case analysis might not be required, it is still important to see how the task you are asked to perform fits within the larger picture of a full-fledged case analysis involving the four steps discussed above.

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

The Student Guide to the Case Method

18

NOTE 3: PREPARING TO DISCUSS A CASE

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

The Student Guide to the Case Method

19

1. INTRODUCTION TO PREPARING TO DISCUSS A CASE IN CLASS The method for a basic case analysis presented in Note 2 of the Case Guide Series—“Performing a Case Analysis,” No. 9B18M054—can be used for various purposes: discussing the case in class, writing a report, making a presentation, or writing a case exam. This note helps you to adequately prepare to discuss a case in class and to provide meaningful input to the class discussion. The guidelines in this note are for general use. You should always defer to your instructor’s requirements, which may differ or be more specific. 2. PREPARE BEFORE CLASS To benefit from many of the opportunities of the case method, you need to do your own analysis before class and make your own decisions based on that analysis. Read the case once for familiarity and a second time to gain a full command of the facts, so you have good insight into the issues. As you read the case the second time, highlight the key points and make notes based on your assigned tasks. If questions about the case are provided in the course syllabus, they are intended to be used only as guidelines to identify the issues and some of the analysis to be done. You are still required to come to your own conclusions regarding the issues and relevant analysis. In most instances, you are expected to do a full analysis of each case: identify the key issues, problems, or opportunities (collectively referred to hereafter as “issues”); analyze the issues using case facts and relevant business tools, concepts, and models; develop and evaluate some alternative solutions (again drawing on case facts and appropriate tools, concepts, and models); and recommend a course of action. Prepare two or three pages of notes to take to class. These notes will give you talking points for the class discussion. Use your notes in class to keep track of the points your colleagues raise and to quickly identify opportunities to add to the discussion. As you track the discussion, you can formulate arguments to challenge your colleagues’ analysis of the case or to revise your own thoughts about the case. Due to time or space constraints, your instructor might require only a partial case analysis. For example, you could be asked to focus only on identifying and analyzing the issues. Alternatively, the case might clearly define the issues, and you could be asked to only identify and evaluate possible solutions. Another form of partial case analysis is a “directed case,” in which you are directed to answer a specific set of questions about the case. In such cases, your preparation for class should focus on the partial analysis you have been directed to perform. 3. CONTRIBUTE TO IN-CLASS DISCUSSION Your willingness to participate in the discussion of a case will enable you to consider a variety of viewpoints and insights, and thereby gain the full benefits of the class’s collective knowledge and experience. In class, the instructor’s role is to facilitate discussion, often by asking questions. Students should do most of the talking, and you should be prepared to provide supporting reasons for your views. You are expected to show respect for others’ opinions, but you are also encouraged to challenge each other. Similarly, you are expected to be willing to submit your analysis and conclusions to scrutiny by others, without becoming defensive. Several good plans of action are usually possible, so do not refrain from taking and maintaining a minority position, provided you can defend your position using sound analysis. On the other hand, feel free to change your position and recommendations as others’ views emerge and a more complete range of information is assembled.

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

The Student Guide to the Case Method

20

Due to time constraints, it is impossible to discuss every aspect of a case in class. Therefore, your instructor might steer the discussion in a particular direction, or the discussion might centre on only one or two steps of the case analysis; for example, identification and analysis of issues might be the focus of one case, while on another occasion, the issues might be clearly defined and your task could be to focus on developing possible solutions. Nevertheless, you are welcome to introduce additional ideas, other issues or a new alternative, for instance. Doing so will help to avoid feeling frustrated because some of your best ideas are not discussed. While your instructor might not be able to discuss your ideas to your complete satisfaction, you can enrich the discussion by noting additional aspects of the case that are worthy of more consideration. Generally, the class as a whole will perform a more thorough and creative analysis than would be possible by any one person working alone or by any given small team of students. Therefore, do not be discouraged because you did not consider a particular solution. As new ideas are raised, be prepared to supplement or adjust your prepared analysis and recommendations. 4. LISTEN TO OTHERS IN CLASS Listening to others in class is hard work. Use active listening techniques, apply listening etiquette, and refrain from activities that will prevent you or others from hearing what the speaker is saying. 4.1. Use Active Listening Techniques Listen for the ideas the speaker is presenting, not just the words being spoken. Link what one speaker is saying to what others have already said. By doing so, you can build on their arguments or dispute their conclusions by making direct reference to their statements. Listen critically for the main argument the speaker is presenting, so you can understand how the speaker’s argument differs from yours, and how the speaker uses case facts, concepts, and models in analysis. Recognizing the logic of the speaker’s argument aids you in structuring your own argument in response. Active listening helps you build on analyses and arguments presented by previous speakers. Ask questions that clarify a speaker’s use of case facts, concepts, and models, and that clarify the conclusions drawn by the speaker. Briefly summarizing a previous speaker’s comments in your notes ensures that you have understood what a colleague has said. This summary can also help you to establish and refine agreement among class members at various stages of the case discussion process. Avoid making judgments about a speaker’s ideas; quick judgments limit your willingness to hear what the speaker is saying, which can lead you to discount the value of your colleague’s contribution to the case discussion. Having preconceived ideas about what a speaker might say can cause you to tune out of the conversation; and when you tune back in, you could have missed a critical component of the speaker’s argument. Finally, approach a discussion with an open mind: you might discover during the class discussion that you misinterpreted a fact or misapplied a concept or model, and that the analysis, alternatives, and recommendation provided by others is more appropriate than yours.

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

The Student Guide to the Case Method

21

4.2. Use Listening Etiquette Listening etiquette begins with focused attention on the speaker. Allowing colleagues to share what they have diligently prepared shows respect for the time they have spent preparing and recognizes the value of their thoughts and contributions. Give feedback to the speaker through your body language: maintain eye contact with the speaker, nod and smile when appropriate, and physically lean into the conversation. Show respect by allowing the speaker to completely finish speaking. A pause could simply be the speaker taking an opportunity to gather thoughts, not an indication that the speaker has finished talking. Appropriate listening etiquette requires that you do not carry on side conversations while a speaker has the floor. Side conversations distract not only the speaker but also those around you, and could prevent a speaker’s ideas from being understood by the entire group. Appropriate listening etiquette also requires that you not be distracted by electronic devices. Ensure that your laptop is open to your notes and the case. Turn off your cellphone and put it out of sight. When your attention is distracted by electronic devices, you also distract those around you and interfere with the collective understanding of the case. Good listening etiquette helps you to develop essential management competencies, skills, and abilities. Your technical, analytical, problem-solving, and creative skills will be sharpened as you evaluate your own analysis against that of your colleagues. 5. ENHANCE THE QUALITY OF YOUR CLASS PARTICIPATION There is no one single way to earn high marks for preparation and participation. However, the following guidelines can enhance the quality of your class participation:  Identify the most important issues, including those that might have been overlooked by those closest

to the situation.  Provide supporting arguments for any statements you make or conclusions you draw, but be clear and

to the point.  Share appropriate analyses; for example, bring your proposed organizational chart or your financial

analysis on a flash drive, or at least be prepared to share a few key specifics of your analysis. This is a clear way to demonstrate your preparation.

 Come to a decision and be prepared to give your recommendations. Any analysis you have completed is of minimal value if it does not culminate in a decision.

 Participate in all phases of the discussion—identification and analysis of the issues, development and evaluation of alternatives, and development of an action plan.

 Interact with other students. Ask them to provide support for their arguments. State why you disagree with their opinion. Build on their analysis, but avoid merely repeating what they have said.

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

The Student Guide to the Case Method

22

NOTE 4: PREPARING A WRITTEN CASE REPORT

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

The Student Guide to the Case Method

23

1. INTRODUCTION TO PREPARING A WRITTEN CASE REPORT The method for a basic case analysis presented in Note 2 of the Case Guide Series—“Performing a Case Analysis,” No. 9B18M054—can be used for various purposes: discussing the case in class, writing a report, making a presentation, or writing a case exam. This note guides you in preparing a written case report by applying the four steps of case analysis described in Note 2. The report described in this note assumes that you are performing a full case analysis (rather than doing a partial case analysis or taking an analytical approach). The guidelines relating to format, organization, and written communication are for general use. You should always defer to your instructor’s requirements, which might differ and be more specific. 2. PLAY YOUR ASSIGNED ROLE For each case assignment, you will be asked to adopt a specific role as a student, consultant, employee, or manager who is writing a report to a specific person or persons. Depending on your assigned role, your analysis could be written as a report to your instructor, your supervisor, the board of directors, or to the client who engaged you as a consultant. In this note, we generally refer to the person who will receive the report as the reader. It is important that before you begin writing your report, you have a clear understanding of who will be reading your report and that person’s (or those persons’) needs and expectations. Your report should be written with your reader(s) in mind. Your audience is reading the report to gain an understanding of how you propose to solve an issue. They are pressed for time and are often inundated with information. They want their information quickly and easily without having to bring extra thought to the process of reading. The following are some suggestions to make your report reader-friendly:  Avoid jargon, inside terminology, and undefined abbreviations.  Keep your sentences simple and straightforward, use paragraphs to group similar thoughts, and keep

your paragraphs short.  Make the information easy to find by using headers and page numbers, clear and informative section

headings, and accurate cross-references.  Avoid decorative elements and be generous with white space—extra lines—between sections so your

reader can easily see how information is clustered. Always use professional tone and tact. However, if you are playing the role of an external consultant, you can be a little bolder in making your points than if you are playing the role of someone from within the organization—especially when writing to a supervisor. 3. IDENTIFY THE ISSUES 3.1. Be Clear A high-quality case report focuses on the most important issues and clearly identifies those issues at the start of the report. Without a clear statement of the issues, problems, and opportunities (collectively referred to hereafter as “issues”) that you intend to address, your report will wander aimlessly from one topic to the next and be of limited value to your reader.

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

The Student Guide to the Case Method

24

3.2. Settle on a Manageable Set of Issues It is important to arrive at a set of relevant issues that are manageable within the size constraints of your written report. (See Note 2 for more information about evaluating and prioritizing issues.) In a short report (e.g., 1,000 to 1,500 words), you can usually effectively address only two or three issues. In a longer report (e.g., 2,500 to 3,000 words), you might be able to address five or six issues. Focusing in-depth on a few key issues is generally more productive than a cursory analysis of many issues. Particularly in long or complex cases, you will need to make choices among the issues and determine priorities. 3.3. Use Your Issue Statement to Let the Reader Know What to Expect An easy way to let the reader know what to expect in the upcoming analysis is to ensure that the issues you identify are the same issues that you subsequently analyze. Something you first identify as an issue might sometimes dissipate or diminish in priority after you begin your analysis, and other issues might surface. This change in priorities is part of the normal iterative process of case analysis. Although you should begin your draft report with a clear issue statement, the issue statement will evolve to a certain degree as you complete your report. Double-back after you have completed your initial analysis of the issues and revise your issue statement accordingly. In the final version of the report, the issues you identify at the start of the report should be in absolute agreement with your subsequent analysis and recommendations. For a complex case, your issue statement should also identify the sub-issues associated with each issue. Noting the sub-issues will help to prepare the reader for the analysis section. For instance, the owner of a business might contemplate whether to expand to the United States. As an issue statement, the question of whether to expand to the United States is superficial and can be made more precise. A full issue statement might include whether the company has the resources to successfully execute such a move, whether the American market is more attractive than the Canadian one, and whether such a move fits with the preferences of others who own a significant share of the company. The reader of the report is then set up to expect, for example, a resource gap analysis; an analysis of market size, growth trends, and the degree of competition in both the American and Canadian markets; and an analysis of stakeholder preferences. To provide another example, a 1999 strategic management case about WestJet Airlines Ltd. asked two questions: “Should WestJet move into Eastern Canada? If so, how soon and to what extent?” For that particular case, a sample issue statement might be

The main issue facing WestJet is whether to move into Eastern Canada. Three key factors to consider in this decision are the degree to which such a move will require the company to deviate from its successful Southwest model, how the move would fit with corporate goals, and the level of competition WestJet would face in Eastern Canada compared with in Western Canada. The second issue facing WestJet is to determine the timing and magnitude of any eastward expansion that would be compatible with the company’s goals and resource constraints, and align with competitors’ plans and capabilities.

This issue statement provides a logical foundation for the following analyses: an assessment of what the Southwest model involves, and how it gives WestJet a competitive advantage; an assessment of goals, such as keeping debt low and continuing to grow in Western Canada; and an analysis of the competition posed by Air Canada and other low-fare entrants in both Eastern and Western Canada. Although the issue statement does not explicitly lay out the types of analyses that will follow in the report, it should provide enough hints and clues that a reader will not be surprised to find a section on “The Southwest Model” or “Analysis of the Competition.” This approach to building an issue statement also ensures that you are being deliberate in selecting and applying various analytical tools and models.

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

The Student Guide to the Case Method

25

Remember, a reasonable degree of clarity about the issues is necessary to begin preparing your case report, but expect your understanding of the issues to evolve as you progress through your analysis. Ensure that your final issue statement reflects your refined identification of the issues and accurately orients the reader to the rest of the case report. 4. ANALYZE THE ISSUES 4.1. Test the Case Facts To produce a high-quality report, you need to present the case facts in a way that contributes to your analysis and adds value to your report. Avoid merely reiterating or rehashing case material. When you restate case facts, be sure they form part of a logical argument and are accompanied by inferences and findings. To ensure that you are using the case facts appropriately, read each sentence in your report that includes a fact from the case and ask yourself, “What’s my point?” If the answer to this question is not addressed in the same sentence or in the next few lines of the report, either delete the fact or explain the inference that you intended to draw. For example, there is little value in repeating that “the company currently holds a five per cent market share in Canada” unless you use that fact to support, say, the contention that the company has room to grow its Canadian customer base prior to expanding into the United States. You do not need to use a formal footnote when referring to material from the case. Direct quotations from the case should be acknowledged by citing the page number of the case in the body of the report, but keep direct quotations to a bare minimum, using them only where special emphasis is desired. 4.2. Use Business Concepts Business concepts that are used as part of your analysis should add value to your report and be relevant to your reader. Avoid discussing theories or models unless you explain them sufficiently and fit them to the situation in the case. For example, discussing what constitutes a competitive advantage is of little value unless you then proceed to use the VRIO model developed by Jay Barney to illustrate that the organization’s resources and capabilities are valuable, rare, inimitable, and that the firm is organized to exploit those resources and capabilities. The required level of explanation depends on the reader’s knowledge, educational background, and organizational position. You might not need to explain common business terms, but do not assume that your reader is familiar with academic or business models such as Victor Vroom’s expectancy theory or the growth–share matrix developed by Boston Consulting Group. Some business terms, such as competitive advantage and core competencies, are widely used but different people might understand them differently. When in doubt, briefly explain a term. For example, you might specify that an organization’s competitive advantage refers to how it intends to attract customers by offering something that is of value to them and differs from what its competitors offer. Specifically and deliberately apply business concepts to the case. For example, a discussion of Raymond Vernon’s model of a product life cycle should categorize the company’s products into various life cycle stages and assess the implications of having two-thirds of the company’s products in the maturity and decline stages. A case report is not an academic research report; avoid writing that is overly theoretical and academic. Considerable skill is required to successfully integrate business theory so that it is perceived as practical and not overly conceptual. At the same time, you want to show your instructor that you are able to apply the course material and demonstrate to the intended reader that you have the appropriate expertise relevant to the situation.

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

The Student Guide to the Case Method

26

4.3. Use External Research Sparingly To keep your task of writing a case report more manageable, most of your reports will not require external research. When your instructor does request external research, the results of your research should also be presented to add value to the report, making it clear why the research is relevant to the situation. Never append external research to your written report without using that research to help dissect issues or build arguments. Acknowledge the source of any external research with a reference note (e.g., a footnote, endnote, or in-text citation). 4.4. Adhere to Length Constraints Your instructor will usually set a word or page limit for your report. Learning to be concise and efficient with your writing will prepare you for writing excellent reports for busy professionals. The analysis portion of your report should be substantial. Together with the evaluation of alternatives, it will form the bulk of your report. However, because of length constraints, be judicious in deciding how much and which parts of your analysis to include in your written report. Some of the analysis is mainly for your own benefit—helping you understand the organization and its industry—rather than being of value to the reader. Your instructor might ask you to include such analysis in an appendix, with appropriate references to the appendix in the report. Alternatively, your instructor might ask you to exclude such analysis from the report to make room for analysis that will be of more value to the reader. 5. DEVELOP AND EVALUATE YOUR ALTERNATIVES Depending on how long your report is and how complex the issues are, you could evaluate as few as three or four alternatives or as many as seven or eight. It is rarely possible to do a good job of evaluating more than eight alternatives. Sometimes, it can seem expedient to group a few alternatives together and evaluate them as a package. However, it can be difficult to evaluate combined alternatives because each component usually has its own pros and cons. As well, evaluating packaged alternatives often obscures some of the issues and results in an evaluation that is less thorough than if each alternative had been evaluated separately. Therefore, it is usually preferable to wait until the recommendation phase to combine alternatives. Rather than providing a complete evaluation of the pros and cons of all your alternatives, it might be sufficient to only briefly mention some of the alternatives and give a short rationale for why they were discarded early in the evaluation process. Since analysis of alternatives is a key part of any written report, ensure that you sufficiently discuss your selected alternatives in the body of the report. Listing the pros and cons in bullet form or presenting such information in tables is an efficient way to evaluate alternatives. However, avoid using phrases that have ambiguous meanings, such as “requires additional resources” or “uses core competencies.” Such phrases leave the reader to draw inferences. Instead, specify the resources that are required or the core competencies to be used. Using lists and tables can also have disadvantages. Too many lists and tables can lead to a report that appears cluttered and is difficult to read. However, a report that is text-heavy can also be cumbersome to read.

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

The Student Guide to the Case Method

27

Therefore, strike a balance. For instance, discuss key pros and cons in paragraph form and supplement the text with a table containing additional pros and cons. Avoid duplicating content in both paragraphs and tables. To help evaluate your alternatives, establish a set of decision criteria and use those criteria to identify pros and cons. Measuring alternatives against decision criteria also helps to keep the analysis consistent, reducing bias. (Evaluating alternatives is discussed in detail in Note 2.) 6. MAKE RECOMMENDATIONS In general, avoid introducing new analysis or new alternatives in the recommendations section of your report. Your recommended solution will be one of the alternatives or a combination of the alternatives you evaluated. In some instances, in an effort to keep a report short, you might be asked by your instructor to combine your evaluation of alternatives with your recommendations and present only the solutions you recommend for adoption. Your goal is to develop recommendations that will be useful, given the issues that you are trying to resolve; consistent with your analysis; reasonable, given the organization and its environment; feasible, given the organization’s resources; and convincing to your supervisor or client. Your rationale should capture the main reasons for adopting your recommendations and show how you have mitigated any significant drawbacks. Your recommendations should be specific enough that they provide the organization with an action plan, including who will implement the recommendations, how, when, and in what priority. In addition to discussing the basic plan of action in the body of the report, it is helpful with lengthy cases to provide an implementation chart in an appendix to capture the details at a glance. Some instructors prefer that you separate your recommendations and implementation plan into two sections of your report, and provide a more expansive action plan with priorities for implementation, detailed timelines, and personnel assignments. 7. CONTENT AND FORMAT OF YOUR REPORT 7.1. Length Your instructor will specify the number of pages or words for each case assignment. Adhere to the restricted length by organizing your report effectively, prioritizing your material, avoiding repetition, and choosing your words carefully. As discussed in Section 3.2, select a manageable set of issues and ensure your set of alternatives is also workable. Presenting some of your analysis and findings in figures or appendices is an economical use of space, often allowing you to present more information in less space than you could in the body of your report (see Section 7.11). 7.2. Font Use the font specified by your instructor in the assignment or course syllabus or on the course website.

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

The Student Guide to the Case Method

28

7.3. Spacing Unless your instructor directs you otherwise, reports should be double-spaced. In business, reports are normally single-spaced; however, double-spacing is usually used in academia to allow room for your instructor to provide feedback. 7.4. Page Numbers The executive summary, which appears directly after the cover page, is not numbered, nor is it calculated in the page count or word count. The remaining pages should be numbered, but the page number should not be shown on the first page. Pages containing appendices should also be numbered, using Roman numerals. Appendices are not included in the page count or word count, although your instructor might set a separate limit on the number of appendices or the number of pages used for appendices. 7.5. Headings and Subheadings Use headings even in short reports; include subheadings in longer reports. Headings and subheadings improve readability by informing your reader what to expect and by keeping your reader oriented within the structure of your report. They make it easier for a reader to return to the report and quickly find needed information. Headings and subheadings also help you to organize your thoughts more carefully, keeping you and, subsequently, your reader focused. 7.6. Cover Page A professional report should include a cover page that identifies the name of the person or persons for whom the report is prepared, the name of the person or persons who prepared the report, the date, and the subject of the report, as shown in the following sample. REPORT TO: Jordan Kerr, President, Kerr Manufacturing Ltd. FROM: Nancy Drake, Eagle Consulting Group DATE: September 20, 2017 SUBJECT: Customer Retention Difficulties

7.7. Executive Summary An executive summary is required unless your instructor specifies otherwise. Write the executive summary after you complete the rest of the report, but place it immediately after the cover page and before the report’s main content. The executive summary is designed to outline the report’s most important issues and recommendations. It should stimulate the reader’s interest in the rest of the report, (e.g. by including profit projections for your recommendations, or for indicating the projected growth in market share) convincing the reader that reading the whole report will be worthwhile and valuable. For the size of report you will produce while a student, the executive summary should not exceed one page (250 words). For a very long report (e.g., 40 or 50 pages), a two-page summary might be justified.

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

The Student Guide to the Case Method

29

7.8. Introduction The first section in the report is a brief introduction, which should capture the purpose and scope of the report. The purpose of the report states why you have been asked to write the report. The scope identifies what you will do in the report (e.g., identify issues, analyze those issues, and develop and evaluate alternatives). The introduction should never include a salutation, such as “Dear Sir” or “Dear Madam.” The introduction is not a brief summary of the case. Your supervisor or the person who hired you as a consultant is already familiar with the facts. However, a sentence or two in the introduction about the company’s current situation helps to explain the purpose of the report. As discussed in Section 4.1, case facts should be included in the report only to make a specific point. Therefore, do not spend time and words reiterating case facts in the introduction. Depending on the style preferred by your instructor and the complexity of the case, identifying the issues can form a key part of the introduction to your report. Usually, though, you will identify the issues in a subsequent section that focuses exclusively on identifying the issues. The latter approach generally is favoured because it more clearly distinguishes the issues for both you and your reader. In general, the introduction should not exceed a half page in length (125 words). If you identify the issues in your introduction, the introduction could be as long as a page (250 words). 7.9. Body of the Report The body of the report is typically divided into sections for issues, analysis of issues, alternatives, and recommendations. Especially for the analysis and alternatives sections, use subheadings for each issue and each alternative to make your report more readable and user-friendly. Subheadings also help you to organize your thoughts (see Section 7.5). Similarly, use paragraphs to separate each group of related thoughts from the next. Use of many short paragraphs will also make your report more readable. If your report includes figures or appendices, make specific reference to the figure or appendix at the appropriate place in the body of your report. This reference directs the reader to link the content in the body with the supplementary information. 7.10. Conclusion The final section in a written report is the conclusion. This section should provide a very brief (no more than a quarter to a half page) summary of the main findings of the report. The conclusion should also convince the reader that it would be beneficial for the organization to adopt the recommendations in the report. The conclusion should follow strictly from your analysis and avoid introducing any new material, since you will have already clearly built your argument in the analysis section of the report. 7.11. Figures and Appendices 7.11.1. The Purpose of Figures and Appendices Figures or appendices are used to capture some of your analysis or recommendations in a form more succinct than prose. Quantitative analysis is usually best presented in figures and appendices. Some forms

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

The Student Guide to the Case Method

30

of qualitative analysis also lend themselves to figures or appendices, such as a complete Porter’s five forces analysis or a resource gap analysis. Appendices are also used to present external research, organizational charts, and other supplementary information. There is no value in reproducing exhibits from the case itself in your report. Instead, refer directly to exhibits contained in the case, using a phrase such as “Exhibit 3 in the materials provided to us” or “case Exhibit 3.” Depending on the size of your report, some items should be incorporated within the body of the report while others should be appended to the back. It is conventional to include relatively short charts or tables or small graphs within the report and to attach longer items to the back of the report. Depending on your instructor’s preferences, small charts, tables, and graphs within the body of a report are referred to as figures, illustrations, or exhibits; exhibits sometimes refer to material appended to the end of a report, but, more commonly, that content is referred to as appendices. Whatever terminology you use, be consistent throughout the report. Each appendix is usually considered to be a stand-alone item that the reader can refer to both during and after reading the body of the report. To help draw the reader into the appendix and to make key information readily accessible in the body of the report, figures can be used to summarize key items from an appendix. For example, a figure can summarize three or four key financial ratios that are provided as part of a comprehensive ratio analysis shown in the appendix. To use figures and appendices effectively, limit their number to suit the size of your report. Also, be sure to refer to material from these items in the body of the report. 7.11.2. Quantitative Figures and Appendices Quantitative figures and appendices should provide a level of detail that is suited to the audience and allows the information to be presented in a readable font (at least 10 points, and depending on the font, preferably 11 or 12 points). For example, a board of directors will not want to review dozens of pages of detailed spreadsheet analysis. The board will expect the report writer to make judicious choices about the number of scenarios and level of detail to present. On an income statement, it is generally sufficient to display four or five expense categories rather than list the 15 or 20 individual expense items, and to state items in thousands or millions of dollars to reduce the number of digits displayed. It will also likely be sufficient to display the most likely, worst-case, and best-case scenarios. However, your supervisor or your instructor might want to see more analysis and a greater level of detail than a board member would require. All quantitative appendices should include a clear trail of assumptions, calculations, and explanations. For example, if your pro forma (forecast) income statement projects a growth in sales of five per cent for each of the next two years, clearly state this assumption and explain why this assumption was used (e.g., it represents the average growth rate for the past three years, or it is the projected increase in demand for the industry). For financial statements, the clearest trail is established when you provide an additional column for assumptions. Alternatively, beside each relevant line item, insert a superscript reference number that corresponds to a numbered note at the bottom of the financial statement. 7.11.3. Numbering of Figures and Appendices Sequentially number (or letter) all figures and appendices to correspond with the order in which they are discussed in the report. Label figures and title appendices to show at a glance what they contain; e.g., “Figure 1: Growth of Market Share, 1995 to 2015” or “Appendix 1: Porter’s Five Forces Analysis.”

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

The Student Guide to the Case Method

31

Figures and appendices should also be professional in appearance and format. Word processing software offers a wide range of colours and designs for charts, graphs, tables, and illustrations; however, unless you are providing the printed copy of the report (and thus have control over the final appearance), avoid the use of colour and keep illustrations simple. Also avoid the use of special effects such as drop shadows and special, complex, or elaborate shapes. Use shading (i.e., fill) in tables and illustrations only when absolutely necessary. The width of borders should be between 0.5 and 1.0 points in size. When designing tables, use only the borders you need to separate rows and columns. Too many lines, vertical or horizontal, add clutter to content and often make a table more difficult rather than easier to read. Figures and appendices are typically not included as part of the prescribed word count; however, your instructor might prescribe a separate limit on the number of figures and appendices. 8. WRITING STYLE, GRAMMAR, AND SPELLING 8.1. Basic Criteria of a Well-Written Report Your report should be well-organized and well-written. Careful attention to grammar—including sentence structure, paragraph structure, word usage, and punctuation—and spelling is essential. Your instructor might evaluate this aspect of your report separately or might show an explicit deduction from your overall grade in an effort to emphasize the cost of poor organization, faulty grammar, and misspellings. A poorly written report will have a negative impact on the reader that will adversely colour the reader’s view of the entire report. For your work to be perceived as professional, competent, and credible, your report needs to be well written. While spell-checkers and other electronic tools are of some value, they do not detect all types of errors (e.g., using “weather” instead of “whether”). It is also helpful to have someone else review your report for readability, clarity, spelling, and grammar. However, a review by another person does not replace the need to take the time and effort to carefully review your own work. Plan your time to allow at least a day or two between finishing your first draft and editing your report; otherwise, you might simply see what you saw the last time. It can also be helpful to read your report aloud or to read the paragraphs in reverse order from the end to the beginning. Finally, you should print and proofread your report. Your eyes and brain have the ability to notice things in a printed copy that are not seen on a screen. Prepare and proofread figures and appendices with the same care as applied to the body of the report. 8.2. Use of “I Think” and “I Believe” Avoid the tendency to preface conclusions and recommendations with phrases such as “I think,” “I believe,” or “We are of the opinion that.” The entire report represents your thoughts, beliefs, and opinions. It should be clear from the context whether you are citing facts or drawing a conclusion. While qualifying expressions can be used occasionally for special emphasis, their overuse leads to a report that appears tentative. 8.3. Formal versus Informal Reports When deciding on the tone of a report, consider the audience, the customary style within an organization, and the preferences of your supervisor or instructor. A report to a board of directors of a large corporation should use more formal language than a report to a small business owner. For example, it is more formal to write, “The report recommends that the organization [do X]” than to write, “I recommend that the organization [do Y].”

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

The Student Guide to the Case Method

32

If your report is directed to your supervisor or a client who is the owner of a small business, use of “I” or “we” is generally acceptable. As well, when addressing the recipient of the report, it is generally acceptable to use “you.” However, if the sentence refers to the recipient’s department or organization as a whole, use “the department” or “the company” or a shortened version of the company name. Opinions differ on whether it is acceptable in a report to use the passive voice (e.g., “It is recommended that”). In general, the active voice (e.g., “We recommend that”) is more compelling than the passive voice, and it demonstrates more confidence in, and ownership of, the recommendations. The active voice is also easier to read and generally uses fewer words. 9. PROFESSIONAL LANGUAGE, TONE, AND TACT 9.1. Use Professional Language The report should use professional language that is both concise and clear. Say something well the first time, and you will eliminate repetition and make room for new content. Keep your sentences short. Ensure that each word communicates the meaning you intend. Avoid flowery language. Remember that you are writing a business report, not an English essay. Also avoid trite expressions, colloquialisms, and slang. For example, use the word “receive” instead of “get;” use “will earn a profit” instead of “will make money;” use “high risk” rather than “big gamble.” Use words such as never, always, and very sparingly to avoid exaggeration and generalization. Such words are often unnecessarily inflammatory. As such, they might cause the reader to become defensive, and they might reduce your credibility. Avoid the use of technical language that your reader will not understand unless you have explained such terms. This guideline also applies to use of theories and models. While you are required to use course concepts in an academic case report (in your role as a student), you are also required to apply them in a way that makes them understandable and relevant to the report recipient (in your assigned role as a subordinate or a consultant). For instance, in an organizational behaviour case, you might choose to apply expectancy theory to explain why employees are not motivated. It is sufficient to state (with appropriate support) that employees do not believe that behaviours being asked of them will lead to customer satisfaction, or they do not believe that their supervisors will reward improvements to customer satisfaction, or they do not value the organization’s rewards. Simple, clear conclusions are preferable to a theoretical outline of what expectancy theory is and what it says about motivation. Also avoid the use of jargon or “business speak.” Jargon obscures your intended meaning and creates the potential for misunderstanding. Jargon also changes with generations; using jargon that might be understood by a young generation of business people might leave an older businessperson frustrated and feeling excluded. Similarly, jargon does not usually translate well or consistently across languages, and is potentially confusing, excluding, or even offending to an international reader. Instead of “reaching out” or “touching base,” “contact” the person. Rather than pursuing “buy-in,” “seek agreement” on a course of action. Use big words only to the extent that you can do so effectively. In general, clarity and conciseness are more important than trying to impress your supervisor, client, or instructor.

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

The Student Guide to the Case Method

33

9.2. Use Constructive Language Since a case report culminates in recommended alternatives for action, the goal is to be persuasive. Throughout the report, be positive, constructive, tactful, and considerate of the reader’s feelings, so as not to alienate the reader. Although one important facet of the report is to identify issues, care should be taken to avoid overly negative language, especially when the report is addressed to your superiors. For example, rather than stating that “management has failed to recognize that the current strategy is no longer effective,” state that, “due to significant changes in the external environment, the company has reached the stage where a new strategy is required to ensure its ongoing success.” Avoid accusatory statements such as “poor management” or “management has neglected to.” It is more appropriate to state, for example, that “there were insufficient controls in place” rather than “there was a lack of internal controls” or “management failed to establish internal controls.” Using appropriate language and tone will make the reader more receptive to what you say in the report about various issues. It will also make your analysis and recommendations more credible. 9.3. Use Must and Need Sparingly Also related to tone and tact is the use of the word must. In general, avoid telling the recipient of the report what the person must do. Overuse of that word reflects a lack of distinction between essential actions and suggested recommendations. As well, must has the connotation of ordering or commanding action. Your reader will react more positively, just as you would, to phrases such as “I recommend,” “It would be beneficial to,” or “The company should,” rather than being told what the reader must do. It is also preferable to use wording such as “Your department should” rather than “Your department needs to.” Reserve need to and needs to for actions that are absolutely essential to emphasize their critical nature. Use “I recommend” for actions that would be prudent or wise. 10. CASE REPORTS WRITTEN BY TEAMS 10.1. Team Meetings If you are assigned to complete your case as part of a team, plan to meet at least twice and perhaps three times to discuss the entire case. Set an agenda for each meeting and hold each other accountable for being prepared. For example, the goals of the first meeting might be to identify the issues and begin to analyze them. Prior to that meeting, each member of the team should read the case at least once, preferably twice, and make some preliminary notes. The goals of the second meeting might be to develop and evaluate alternative solutions and to draft recommendations. Prior to that meeting, individual team members might be assigned the task of completing more in-depth analysis (e.g., calculating financial ratios, comparing the firm’s product offering and value proposition to those of key competitors). Some team members might be assigned the role of capturing what was accomplished at the previous meeting by drafting one or more sections of the report. The agenda for the final meeting might be to review the draft for consistency, clarity, grammar, and so on, and to finalize the report.

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

The Student Guide to the Case Method

34

10.2. Brainstorming One of the key benefits of working in teams is the ability to generate more ideas and to benefit from each another’s ideas. For this advantage to be achieved, it is helpful to use a technique called “brainstorming” when identifying the issues and, especially, when generating alternative solutions. Brainstorming attempts to come up with as many ideas as possible by holding off on any evaluation or criticism of the ideas until a later time. 10.3. The Task of Writing the Report The duty of writing the report can be split or rotated among team members, but the final product should represent a team effort and not simply be a piecing together of several individually-crafted sections. The latter approach usually leads to inconsistencies such as analyzing issues that were not mentioned in the identification of issues, failing to solve issues that were analyzed, or not using much of the analysis contained in appendices. Some editing of a written draft should occur at a subsequent meeting or by means of circulating the draft to all members of the team. The final report is the responsibility of the whole team, not the individuals who are assigned all or part of the writing task. Your instructor might require all members of the team to sign off on the report to acknowledge this shared responsibility. 11. CASE ANALYSIS AND ACADEMIC INTEGRITY Because case analysis is complex, it may often seem helpful to discuss the case informally or formally with other students before participating in a class discussion, writing a report, or making a presentation. Managers and consultants often discuss problems with other people, within the constraints allowed by confidentiality. Therefore, your instructor may allow, encourage, or even require such discussion. However, to ensure academic integrity and to avoid plagiarism, unless your instructor has specifically indicated that some degree of discussion is permissible, you should consult with your instructor before engaging in any collaboration. This restriction on outside discussion is especially necessary when preparing reports and presentations. It may also seem helpful to search the Internet for teaching notes for cases or for case reports or slide presentations prepared by other students. Academic integrity requires that you refrain from using such resources, in full or in part. Any attempt to use the work of others and to pass it off as your own is plagiarism. If the instructor is suspicious that plagiarism might be involved, you may be asked to upload a copy of your case report through Turnitin.com. While using the work of others may appear to provide a shortcut to a good grade, the quality of online sources and the work of other students is often suspect, at best. Most importantly, you deprive yourself of the learning opportunities the case method offers.

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

The Student Guide to the Case Method

35

NOTE 5: MAKING AN ORAL CASE PRESENTATION

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

The Student Guide to the Case Method

36

1. INTRODUCTION TO MAKING AN ORAL CASE PRESENTATION The method for a basic case analysis presented in Note 2 of the Case Guide Series—“Performing a Case Analysis,” No. 9B18M054—can be used for various purposes: discussing the case in class, writing a report, making a presentation, or writing a case exam. This note guides you in making an oral presentation to your instructor and class colleagues. The note covers the purpose of a presentation and provides guidelines for preparing and presenting a case to a classroom audience. The note also provides general guidelines related to format, organization, and verbal communication skills. The guidelines in this note are for general use. You should always defer to your instructor’s requirements, which may differ or be more specific. 2. PURPOSE OF A CASE PRESENTATION Especially in the business world, an oral presentation is typically used to highlight the main findings in an accompanying written report. However, the oral presentation is distinct from the written report, largely because information presented orally is perceived and absorbed differently from information provided in writing. An oral presentation should provide a broad overview of the main issues and recommendations. It should not provide the same level of detail as a written report, so be discerning in choosing which elements of your case analysis to emphasize. The overall goal of a presentation is to convince your audience that you understand the key issues and have a logical and feasible action plan for resolving them. 3. CRITERIA OF A GOOD PRESENTATION A good presentation conveys information in a format that enables your audience to comprehend the intended message. With any communication, information is encoded by the sender, transmitted using one or more media, and decoded by the receiver. At any point in the process, communication can be disrupted, hindering the clarity of the message. A communication disruption can occur for a variety of reasons, including the amount of information being conveyed, the presentation tools and techniques being used, and the skills of the presenters. Good presenters are aware of the potential disruptions to a message and craft their delivery to minimize those disruptions. For each case, you will be asked to play a specific role as a student, consultant, employee, or manager who is writing a report or making a presentation to a specific person or group, or both. Depending on the directions of your instructor, you will be presenting to your instructor, a manager, a board of directors, or a client who engages you as a consultant. A good presentation addresses the needs and knowledge of the intended audience. However, while the presentation (and accompanying report) might be intended for one individual, you should present to the entire audience in the room. For instance, if the presentation (and accompanying report) is being directed to the vice-president of marketing, address your presentation to the vice-president and thank the individual for “inviting the rest of the management team to the presentation.” Always use professional tone and tact. However, if you are playing the role of an external consultant, you can be a little bolder in making your points than if you are playing the role of someone from within the organization—especially when presenting to a supervisor.

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

The Student Guide to the Case Method

37

4. CONTENT OF A CASE PRESENTATION 4.1. Presentation of a Full Case Report Once a case analysis is complete and the report has been written, review the report and identify the key portions that the individuals reading the report need to know. These highlights will form the outline of your presentation and will help you to present what is written in the report and avoid introducing different material. Your audience will read your report to gain greater understanding of the information included in your presentation. A full case presentation typically consists of three parts: the issues, key alternatives, and your recommendation. First, describe the issue or issues you identified as being key to the case. Briefly provide your reasons for selecting those issues, reflecting the theories and models you used during the analysis stage (see Note 2 of the Case Guide Series—“Performing a Case Analysis,” No. 9B18M054). Be mindful of your audience and offer your theoretical analysis only if it adds value. Use of too much theory, especially when it is not well applied, undermines your expertise and credibility. It is inappropriate and impractical to repeat all the theoretical analysis contained in the report or to cover it in detail during a presentation. Second, present the key alternatives you identified as being possible solutions to the issue or issues, providing a brief rationale for each. Restraint is key: do not include in your presentation everything contained in your report. A presentation is a high-level review of your report, mainly focused on what you identified as the issues and ways to resolve them. Finally, offer your recommendation. Persuade the audience that the solutions you have chosen will best resolve the issue. Anticipate objections the audience might raise and counter them in your presentation before they are raised. As you structure your presentation, use the slide sorter capability of the presentation software to bring a logical flow to the content. Once you have the high-level points outlined on slides, you can easily write the script for the presentation since you will be writing with the end of your presentation (i.e., your proposed solution) in mind. 4.2. Presentation without a Case Report In some courses, your instructor will ask you either to complete only specific components of a full case study, or to present the case without writing a full report. If you are presenting only individual components of a case analysis, performing a full analysis, as outlined in Note 2 (identify the issues, analyze the issues, develop and evaluate alternative, and recommend a course of action), will better equip you to present the analysis of the specific components your instructor requires. For example, if you are presenting only the issues, your preparation should include analysis of those issues so you can confidently present the issue statement. If only the presentation is required, it is essential that you have a sufficient understanding of the underlying issues and analysis to select the most appropriate material for your presentation. Because you will not have a written report to use as a roadmap for the presentation, it is crucial that you follow the four case analysis steps in Note 2 so that your understanding is sufficient to present the case in a convincing manner and so you can support your recommendations with sound logic. Provide enough detail in your presentation to assure your instructor that you understand the issues and have applied appropriate theory; at the same time, avoid overwhelming your audience with too much content and theory.

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

The Student Guide to the Case Method

38

5. AUDIOVISUAL AIDS Your presentation should be accompanied by audiovisual aids, such as presentation slides (e.g., PowerPoint, Prezi, or Google Slides), video clips, a blackboard or whiteboard, a flipchart, or handouts. These audiovisual aids can give your audience an outline of your presentation and show them some details (e.g., a ratio analysis or market share analysis) or an illustration (e.g., an effective advertisement). However, use audiovisual aids thoughtfully; avoid diverting your audience’s attention from both you, as the presenter, and the main message you are communicating. The focus should be on the content, not on the technology being used to present the content. Presentation slides should be simple and use at least 28-point font. Choose a sans serif font for text. It is simpler, cleaner, and easier to read on a screen. It also does not pixelate when enlarged by the projector, making it clearer to read, even for the audience at the back of the room. Use short phrases that supplement—and do not reiterate—what you are going to say. Do not fill the slides with text, or your audience will be more focused on reading the slides than on listening to you. It might be necessary, especially with slides containing financial statements, to break the statements into sections on two or three slides. When communicating a message that contains financial data, consider whether a pie chart or graph might better convey the message. Animations should be used with caution; they can be distracting and cause your audience to focus more on the graphics than on the content of your presentation. Use subtle transitions and animations, with bullet points “appearing” or “wiping in.” Avoid animated graphics or cartoon clip art; they quickly become annoying to the audience and reduce the professionalism of your presentation. If you use a graphic or photograph, use high-quality images that will not pixelate or degrade as they are resized on the screen. Know the room in which you are presenting, especially how the lighting affects the room’s projection screen. The room’s lighting will dictate the colours you choose for the background and font in the presentation. For example, if the room has windows, choose starkly contrasted background and font colours so the text does not get washed out by the light, making it difficult for the audience to read. If you prepare your slides using your own computer and software, preview your presentation in the school’s lab to ensure that your presentation is compatible with the version of software available in the classroom and that your computer is compatible with the projection system. If you have the opportunity, preview the presentation in the room in which you will be delivering the presentation, so you can assess whether the content of the slides is readable. If you intend to use a blackboard or whiteboard, plan how you will use it. Include in your speaking notes a quick sketch of what you intend to write on the board, and the location of each component you will write. This preparation enhances your professionalism and keeps the presentation moving. 6. PRESENTATION SKILLS The role identified for you in the case or by your instructor will guide how you approach your presentation. Nonetheless, some key skills are required for all presentations. During your presentation, speak loudly enough to be heard by all members of your audience. Use an expressive voice, speak at an appropriate speed (which might feel unnaturally slow), pause where appropriate for emphasis or to allow your audience to absorb information, and make regular eye contact with members of the audience. Remember that you are the authority on the subject, so do not just read what you have written in your report.

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

The Student Guide to the Case Method

39

Choose words and structure your sentences to serve the nature and capacity of the audience. Keep in mind that people’s ability to absorb information is lower when the information is presented orally rather than in writing. While it can be more comfortable to stand behind the podium where you can read from your notes, step out from the podium—at least periodically—to connect with your audience. Be comfortable. Become a professional and polished version of yourself. If you are holding cue cards or speaking notes, keep them still as you refer to them, so they do not draw attention away from the message you are communicating. Presentation skills improve with practice. Script, adjust, and practise your presentation until it fits the time you are allotted. By exceeding the time limit, you reflect a lack of preparation. Your instructor might cut you off, or if more than one presentation is scheduled in the class period, you might infringe on the time allotted to the next presenter.

7. HANDLING AUDIENCE QUESTIONS A presentation usually includes time at the end for questions and answers, but some presenters prefer to take questions throughout the presentation. Whichever you choose, let your audience know at the start of the presentation how you will be taking questions. Some presenters take a mixed approach, responding to brief questions of clarification during the presentation, but reserving more detailed comments and questions until the presentation is finished. This approach works well in classroom presentations when the whole class is responsible for interacting with the presenter. The ability to listen can set you apart as a business professional, and active listening skills enable you to understand what members of the audience are asking. Be present and listen fully to the question; if you start formulating an answer before the audience member has finished asking the question, you risk responding inappropriately or incompletely. Acknowledge the audience member and the question. Move toward the person who asked the question—this is a perfect opportunity to move away from the podium. Establish eye contact with the person during the question and the first part of your answer, then broaden your attention to other audience members. Thank the individual for the question, and if other members of the audience might not have heard the question, repeat it so all can hear. If the question refers to an option you considered but did not discuss during the presentation, respond appropriately and explain why you did not include the topic in the presentation or why you discarded the alternative. If the question raises a point you had not considered, thank the questioner for the input and acknowledge that you did not include it in your evaluation. If time allows, discuss the topic further. Always be gracious, courteous, and professional.

8. TEAM PRESENTATIONS In the case of a team presentation, all members of the team should be involved in some aspect of the presentation, and the transition from one presenter to the next should be as seamless as possible. Each member’s part in the presentation should be agreed on in advance to avoid both duplication and omission of material. As you prepare the presentation, identify each member’s strengths and weaknesses so that you can capitalize on individual presentation skills and specialized understanding of the content. During the presentation, team members who are not speaking should avoid being a distraction. Stand back from the speaker and remain still. Do not whisper among yourselves, stand in an awkward place, or fidget. Where possible, play an appropriate supportive role; for example, distribute handouts or run the slide show to free the speaker of these duties.

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

The Student Guide to the Case Method

40

To ensure your presentation is professional, script and rehearse the presentation several times, including transitions from one presenter to the next. 9. ROLE OF THE AUDIENCE As a member of the audience, you are actively involved in the presentation. Your preparation of the case for class discussion should equip you to critically evaluate the presenter’s approach to the case. (See Note 2 and Note 3 of the Case Guide Series—“Preparing to Discuss a Case,” No. 9B18M055.) Your instructor might also evaluate your preparation and participation in the class. Just as the presenter plays an assigned role, so, too, should the audience members. For example, if you are taking the role of the board, ask questions that board members would ask. Such questions might ask about the level of risk assigned to a course of action, the estimated return on investment, and the impact on other stakeholders of the organization should the recommended solution be implemented. Listen actively, focus on the speaker, allow the speaker to completely finish, listen for the ideas being presented, and listen critically for the presenter’s main arguments. Good questions are a challenge to formulate, and they should respond to the content you heard from the presenter. Bring a two- or three-page summary of the case to class, and make notes in the margins of that summary to compare what the speaker presents against your own preparation of the case. Ask questions that clarify the presenter’s position so that you can persuasively argue your own position. Again, at all times, be gracious, courteous, and respectful of the presenter and of other audience members. 10. DRESS FOR SUCCESS Attire for presentations should be appropriate for a business setting and should also reflect your audience. Appropriate attire includes dress pants, skirt, dress shirt, blouse, and/or tie. Jackets are optional, except for when you make a formal presentation to a board of directors. Your clothing should not distract audience members from focusing on the content of your presentation; it should also reflect the highest regard for professionalism.

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

The Student Guide to the Case Method

41

NOTE 6: PREPARING FOR AND WRITING A CASE EXAM

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

The Student Guide to the Case Method

42

1. INTRODUCTION TO WRITING A CASE EXAM The method for a basic case analysis presented in Note 2 of the Case Guide Series—“Performing a Case Analysis,” No. 9B18M054—can be used for various purposes: discussing the case in class, writing a report, making a presentation, or writing a case exam. This note guides you in preparing for and successfully writing a case exam. The guidelines in this note are for general use. You should always defer to your instructor’s requirements, which may differ or be more specific. 2. PURPOSE OF A CASE EXAM The task of performing a case analysis might form part or all of your examination for a course. If it forms only part of your exam, your instructor will likely use short cases or direct you to restrict your analysis to specific tasks. If performing a case analysis represents the entire exam, you should expect a longer case with less direction, although your instructor might still provide a set of questions to guide your analysis. A case exam is designed to test your ability to apply the case method under constraints of time and resources. If an exam is performed in a closed-book setting, you are expected to remember and understand course concepts, models, and theories well enough to apply them to the assigned case. If an exam is performed in an open-book setting, you must still have sufficient knowledge of concepts, models, and theories to be able to recognize which are relevant to the case and where to find them quickly in your notes or text. Your instructor’s decision to evaluate your performance using a case exam indicates that the main learning outcome is application of the course concepts, models, and theories. Application requires a higher level of understanding than memorization and recall. This approach is also consistent with the classroom discussions if your course has made significant use of cases. 3. PREPARING FOR A CASE EXAM Studying for a case exam is unlike studying for other types of examinations in that the goal of a case exam is application rather than memorization or recall. It also differs in that you do not know what type of questions to expect on the exam. For both of these reasons, you are limited in terms of what you can study before the exam. If the exam is open-book, your preparation should include determining the material you are most likely to want to use and how you will access it quickly. 3.1. Reread Notes and Texts Reread your notes and reread your text in anticipation of the course concepts, models, and theories you are most likely to be asked to apply in the case exam. Your priorities should be guided by the following:  Course learning outcomes in your course syllabus or on the course website.  The types of cases assigned throughout the course—the size of case, nature of issues, topics covered,

and types of industries. – While a case exam will not ask you to recall specific facts from cases used in class, cases used in

class do provide some important clues regarding the issues you will encounter on the case exam.  Types and depth of analysis required during the course—full case analysis, partial case analysis, or

simply answering questions.

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

The Student Guide to the Case Method

43

– Due to time limits in a case exam, you will not be expected to apply the same depth of analysis that you would be expected to apply in class discussion, written reports, or presentations. Nonetheless, a case exam will often require that you perform all of the usual steps of analysis. If all steps are not required, your instructor will usually alert you to this requirement before the exam. (For a discussion of partial and full case analysis and directed cases, see Note 2 of the Case Guide Series—“Performing a Case Analysis,” No. 9B18M054.)

 Concepts, theories, and models emphasized in class discussions, especially those that were discussed frequently.

 Any instructions your instructor provides about the focus of the case exam. 3.2. Practise Writing a Case under Exam Conditions It is useful to review one or two of the cases discussed in the course and redo the analysis under the time constraint imposed by the exam. Because you will be familiar with the case, consider giving yourself less time than will be available for the exam. Also, simulate exam conditions, including whether it is closed- book or open-book. Practising for an exam helps you assess which case analysis steps will require better time management during the exam. Practice also gives you some confidence that you can perform the expected analysis within the allowable time. 4. WRITING A CASE EXAM Writing a case exam can be an anxious time, given the time constraints and the uncertainty of being thrust into a new situation. Successfully writing a case exam requires that you remain calm and manage your time wisely. 4.1. Read the Instructions Carefully read the instructions to maximize your opportunity to excel in the exam. Your instructor will likely provide some questions, either at the end of the case or in a separate document. In a directed case, your assignment might simply be to answer those questions. In a case requiring partial or full case analysis, the questions should help you to identify key issues and the analyses you need to perform. For example, questions such as, “What threats are posed by traditional and non-traditional competitors?” and “Is the company’s competitive advantage sustainable? If not, how can it build a sustainable competitive advantage?” help you to identify potential issues as being increasing competitive threats and lack of a sustainable competitive advantage. The questions also suggest two types of analyses that might be helpful—a competitive position matrix and a competitive advantage analysis. Questions such as, “What are the pros and cons for the company focusing on a niche market?” or “Assess the potential of increasing the number of product lines,” help direct your attention to two potential alternative solutions for evaluation: serving a niche market or increasing the number of product lines. In addition to carefully reviewing any questions provided by your instructor, look for instructions regarding:  the role you are to assume when performing the analysis and writing the report;  steps in the case method that are required for the exam;  key issues; and  the format of the report.

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

The Student Guide to the Case Method

44

For example, consider these instructions:

Acting in the capacity of a consultant, write a report to James Alou, chief executive officer, who has asked you to evaluate the proposed new sales incentive plan for Andover Manufacturing Inc. (AMI).

Your report should identify the issues associated with the new incentive plan, analyze the issues, and present appropriate recommendations. Each recommendation should be justified by clearly identifying which issue or issues the recommendation is designed to address, by presenting its major advantages, and by addressing any significant disadvantages. It is NOT necessary to present possible alternatives that you do not recommend.

An appropriate heading, introduction (which can include identifying the issues), and brief conclusion are required. An executive summary is NOT required.

These instructions specify the role you are to play (a consultant). They direct your attention to evaluation of the new incentive plan, and suggest that there are issues related to that plan. The instructions also restrict the steps you are to perform in completing your analysis. Lastly, the instructions provide guidelines for the report format. Watch for additional instructions regarding numbering of pages, required page headers, and assembly of your exam. 4.2. Read the Case Give yourself time to read through the case twice. In your first read, skim the case. Your goal during the first read is to develop a preliminary understanding of the issues, problems, or opportunities (collectively referred to hereafter as “issues”) facing the decision maker. In the first read, resist the temptation to highlight text in the case, except for key questions raised by the principal actors or characters. Questions raised by the principals are important to note because they help you to identify key issues. (For further information about how to read a case, see Note 1 of the Case Guide Series—“Understanding the Case Method,” No. 9B18M053.) Your second read of the case should be more deliberate to help you gain a better understanding of the issues and any potential solutions proposed by the principals. You should also identify relevant analyses to perform and case facts that you can use when performing those analyses. Highlighting the case at this stage will help you use the case facts effectively. In a three-hour case exam, you should spend no more than 45 minutes reading the case. 4.3. Prepare an Outline While preparing an outline of your report can appear to be an extra step that consumes valuable time, taking 15 minutes to briefly map out key parts of your report helps you to allocate your time and will likely save you time later. An outline provides a valuable roadmap to keep you focused, allowing you to move methodically from one step to the next. It prevents you from losing sight of excellent ideas and becomes especially important as you begin to feel more rushed toward the end of the exam. Your outline should identify the main parts of your report, the key issues, important points for your analysis of the issues and the tools you intend to use, and at least some alternative solutions—particularly those raised by the principals in the case or identified in questions that accompany the case.

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

The Student Guide to the Case Method

45

Your outline could also include key decision criteria to use when evaluating the alternative solutions you develop (see Section 4.4.5 or Note 2, Section 4.2). 4.4. Write Your Report When writing your report, start each section on a separate page and double-space your answer. This format will allow you to easily add more material later without crowding what you have done so far. Remember to use proper report format, unless otherwise directed. Here, again, it is important that you have carefully read the instructions so that you do not spend time on tasks that do not help you earn marks. Refer to Note 4 of the Case Guide Series—“Preparing a Written Case Report,” No. 9B18M056—for more information about the required components of a report and how to write an effective case report. Bear in mind that an instructor generally scales back the expectations for a report written under the time pressure of an exam. 4.4.1. Prioritize and Manage Your Time Allocate your time to the most important tasks: the analysis of issues and the evaluation of alternative solutions. For the introductory paragraph and the conclusion, do just enough to achieve their required purpose. Provide an executive summary only if your instructor directs you to provide one. During an exam, as long as you identify the key issues and key alternatives, it is generally better to analyze fewer issues and alternatives well than to attempt to deal with too many issues and alternatives, which might result in you running out of time. Here, your report outline will come in especially handy; refer to it to stay on track. 4.4.2. Identify the Issues Keep your identification of issues brief and to the point so that you avoid repeating content when you perform the subsequent analysis. Also ensure that your set of issues is manageable. 4.4.3. Analyze the Issues Use concepts, models, and tools to analyze the issues so that your analysis reflects the necessary rigour to demonstrate your mastery of course concepts. However, here again, adhere to your outline so that you do justice to all of your chosen models and tools. 4.4.4. Identify Alternative Solutions Identify any potential solutions that were considered by the principals in the case or that were suggested by your instructor in the directions and questions provided to you. Since keeping things the same is seldom a viable alternative, you are generally better to allocate your time to alternatives that offer some improvement. Identify other alternatives, as long as your set of alternative solutions is still manageable. 4.4.5. Evaluate Alternative Solutions Evaluate how effectively potential solutions will resolve one or more of the issues you have identified.

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

The Student Guide to the Case Method

46

Establish your set of decision criteria to help you quickly generate the pros and cons of your proposed solutions and to evaluate your alternatives consistently. For example, in a strategic management case, decision criteria might include the degree to which the action:  fits with the organization’s mission, value proposition, and goals;  fits with stakeholder preferences;  is profitable;  capitalizes on specific external opportunities;  builds on an existing competitive advantage or helps to create a competitive advantage; or  requires additional resources and competencies. It is especially important when performing a case analysis in an exam setting to choose a manageable set of criteria so that you can fully capitalize on a framework for developing pros and cons. (See Note 2 for detailed information about evaluating alternatives.) 4.4.6. Make Your Recommendation In an exam setting, the most important parts of your recommendation are what you recommend and a brief summary of why—specifically how your recommendation resolves the issues you identified. As time allows, you can fill in the who, how, and when. If your instructor requires an implementation plan, consider using a chart, which is the most efficient way to complete this task during an exam, especially as your time draws to a close.

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

The Student Guide to the Case Method

47

NOTE 7: USING COMMON TOOLS FOR CASE ANALYSIS

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

The Student Guide to the Case Method

48

1. INTRODUCTION TO COMMON TOOLS FOR CASE ANALYSIS The method for a basic case analysis presented in Note 2 of the Case Guide Series—“Performing a Case Analysis,” No. 9B18M054—can be used for various purposes: discussing the case in class, writing a report, making a presentation, or writing a case exam. This note provides you with a few of the more popular tools used in case analysis and guides you in using those tools. The guidelines in this note are for general use. You should always defer to your instructor’s requirements, which may differ or be more specific. 2. HORIZONTAL ANALYSIS The data presented by the case author(s) in figures and exhibits will provide you with some of the best opportunities for value-added analysis. Reorganize and summarize the data. Perform additional calculations. Draw new comparisons. In doing so, you will be able to interpret existing information in new ways and provide support for new findings. When data are presented in numerical form, a logical first step in analyzing the data is to compute percentage changes from one year to the next, or to assess the magnitude of the differences between one company and the next. Look for trends such as whether the company is gaining or losing market share compared with its competitors, and whether sales are growing or shrinking, and the rate of change. When calculating year-over-year percentage changes, the earlier year’s number forms the base:

‐ ‐ 2 1

1

For example, suppose you are given the following numbers:

Year  Sales 

2015  $184,700 

2016  $182,500 

2017  $179,800 

The percentage decrease in sales from 2015 to 2016 , – ,

, 1.19%

The percentage decrease in sales from 2016 to 2017 , – ,

, 1.48%

For the two-year period:

The percentage decrease in sales from 2015 to 2017 , – ,

, 2.65%

From the above horizontal analysis, you can conclude that sales are declining at an increasing rate.

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

The Student Guide to the Case Method

49

3. VERTICAL ANALYSIS Vertical analysis or common size analysis expresses each item on a financial statement in terms of a percentage of a base amount. The base for income statement items is usually sales. For example, you can calculate cost of goods sold (COGS) or other expenses as a percentage of sales. Potential bases for statement of financial position (balance sheet) items are total assets or total liabilities. For example, you can calculate inventory as a percentage of total assets, or you can calculate current liabilities as a percentage of total liabilities. Vertical analysis facilitates comparison between one business and its competitors of different sizes. It also allows a business to compare its own results from one year to the next. For instance, if sales were higher, one would expect COGS to also be higher. By expressing COGS as a percentage of sales, we can determine whether sales price increases are keeping pace with cost increases. For example, suppose you are given the sales numbers in Section 2.1 and the following numbers:

Year  COGS 

2015  $85,800 

2016  $84,500 

2017  $86,200 

85,800 184,700

46.4%

Year  % of Sales 

2015  46.4 

2016  46.3 

2017  47.9  You might note that for 2015 and 2016, COGS as a percentage of sales was fairly steady, but in 2017 the percentage rose significantly to 47.9 per cent. Referring back to Section 2.1, you might also note that sales had declined from the previous two years, leading to questions about not only the drop in sales but also the reasons for the sharp increase in COGS. 4. RATIO ANALYSIS In many cases, it is beneficial to analyze an organization’s financial performance by performing ratio analysis. Ratios show the relationship among selected items of financial statement data, as expressed by a percentage, rate, or proportion. Ratios are useful only if they are compared to ratios of prior years, ratios of competitors, industry standards, and forecast ratios. Be judicious in both your calculation and interpretation of ratios to ensure that your financial statement analysis adds value to your report. The most valid external comparisons involve companies within the same industry, or industry benchmarks produced by such organizations as J.D. Power or Deloitte. General benchmarks, known as “rules of thumb” are sometimes available; however, industry benchmarks take precedence over general benchmarks, since ratios can be expected to vary considerably from one industry to the next.

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

The Student Guide to the Case Method

50

When a ratio mixes balance sheet (statement of financial position) values and income statement (statement of earnings) values, use an average of the balance sheet values. (This approach is used because an income statement provides information about a company’s performance over a period of time, whereas a balance sheet is comprised of values at one point in time.) When the value at the beginning of the time period is unavailable (e.g., when only two years’ data are available and you are calculating comparison ratios for two years), use year-end values as a proxy for the average. However, the more asset values fluctuate over that period of time, the more use of a year-end value distorts the picture. The following formula is used to calculate the average of balance sheet values:

2

where one year’s beginning value is the prior year’s ending value. Provided below are the formulas and brief interpretations of three types of ratios—profitability or activity ratios, liquidity ratios, and solvency ratios. 4.1 Profitability or Activity Ratios Profitability ratios measure a business’s ability to generate earnings from providing goods and services. Profitability ratios can be useful for comparing a business’s present and past performance, or comparing a business with that of its competitors or industry benchmarks during the same period in time. The three main profitability ratios are return on assets (ROA), return on equity (ROE), and earnings per share (EPS). As will be shown below in Sections 4.12 through 4.18, changes to ROA can be explained by calculating other ratios. 4.1.1 Return on Assets

Return on assets (ROA) indicates the profitability of a business relative to the assets invested in the business. An ROA of 10 per cent indicates that for every dollar invested in assets, the business earns 10 cents in profit. Instead of net income (also referred to as profit or earnings), income from continuing operations can be used to provide a better benchmark for future comparison, since discontinued operations will no longer be available to generate profit. ROA depends on two factors: profit margin and asset turnover. Thus, the equation for ROA can also be stated as follows:

4.1.2 Profit Margin

Profit margin indicates the profitability of a business relative to its sales revenue, and reflects how well a business is controlling its various expenses. Expressing net income relative to sales revenue provides a more meaningful comparison of the business’s performance from one year to another than merely comparing net income in the two years. A profit margin of 12 per cent indicates that for every dollar of sales revenue, the business has 12 cents left in profit after all expenses are deducted.

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

The Student Guide to the Case Method

51

Profit margin, in turn, can be dissected to analyze how well individual expenses are being controlled. 4.1.3 Gross Profit Margin

Gross profit is a preliminary measure of profitability. It measures a company’s ability to maintain an adequate selling price above its cost of goods sold (COGS). Gross profit also measures the company’s ability to pay operating and other expenses. If the gross profit margin is 30 per cent, the business has 30 cents left from every dollar of sales revenue to pay operating and other expenses. In other words, for every dollar in sales revenue, it costs the business, on average, 70 cents to make or buy the products it is selling, leaving 30 cents to pay operating expenses, such as wages and rent, and other expenses, such as interest. A declining gross profit margin is a sign that selling prices are not keeping up with increases in COGS. 4.1.4 Expense Ratios

Expense ratios measure the portion of income that is spent on specific expenses. An expense ratio that is higher this year than the previous year could indicate that the company has potential problems with controlling costs in individual expense categories such as selling expenses, administrative expenses, and interest expenses. However, increasing the amount spent on expenses could also be the key to future growth, as would be the case, for example, if the business significantly increased its advertising and promotion expenditures or added new salespeople in an effort to increase sales. Note that although you can calculate an expense ratio using COGS, the result would be the complement of the gross profit margin (i.e., if the gross profit margin is 34 per cent, then COGS is 66 per cent of the net sales). 4.1.5 Asset Turnover

The asset turnover ratio, the second main determinant of ROA, measures how well a business uses its assets to generate sales. If the asset turnover ratio is 8.33 per cent, the business is generating 8.33 cents in sales for every dollar invested in assets. Thus, the two keys to improving a company’s ROA are to improve the profitability of each sale of a good or service and to sell more goods and services in the first place. 4.1.6 Inventory Turnover

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

The Student Guide to the Case Method

52

365

The inventory turnover ratio measures the average number of times inventory is sold during the period. The higher this ratio, the more quickly inventory is being sold and, therefore, the more efficiently inventory is being used to generate sales. The days in inventory ratio measures the average age of the inventory—the average number of days products remain in inventory, measured from the time the company produces or purchases the product to the time the product is sold to customers. Days in inventory is an easier ratio to interpret than inventory turnover, but calculating days in inventory relies on first computing inventory turnover. 4.1.7 Receivables Turnover

The receivables turnover ratio measures the number of times, on average, that receivables are collected during the year. The average collection period shows the average number of days it takes a business to collect accounts receivables from customers. The average collection period should be evaluated in relation to the business’s credit terms; for many businesses, accounts are due within 30 days. The average collection period is the easier of the two ratios to interpret, but it cannot be calculated without first computing the receivables turnover. 4.1.8 Return on Equity

Return on equity (ROE) is the second main ratio that helps to assess the profitability of a business. It measures the return on shareholders’ equity—the profit relative to the investment of common shareholders (the true owners of the corporation). Because preferred dividends are reserved for and are paid out to preferred shareholders, they do not belong to the common shareholders and are subtracted from income before calculating ROE.

A ratio of 17 per cent indicates that for every dollar invested by common shareholders, the corporation earns 17 cents in profit. ROE is affected by two factors: ROA and debt to total assets. Thus, to improve its ROE, a firm can improve its ROA, increase its use of debt financing (known as increasing the use of leverage), or both. However, more reliance on debt financing also increases the risk that the organization will be unable to make interest and principal repayments.

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

The Student Guide to the Case Method

53

4.1.9 Earnings per Share

The third main measure of profitability is earnings per share (EPS), which looks at profitability from the perspective of common shareholders, who are the residual owners of the corporation. It expresses net income on a per share basis. EPS is widely used to compare profitability from one year to the next or to compare actual profitability against expected profitability. The calculation looks simple, but several accounting rules are applied to determine both the numerator (the income available to common shareholders) and the denominator (the weighted average number of common shares). EPS is the only ratio that public companies are required to publish in their financial statements. Announcements of expected or actual EPS can cause stock prices to fluctuate, as the market reacts to the company’s initial projections and its subsequent performance against those goals. However, because companies each have widely varying numbers of common shares, EPS cannot be used for intercompany comparisons. 4.1.10 Price-Earnings Ratio

The price-earnings (P/E) ratio looks at the market price of shares compared with earnings expressed on a per share basis. A P/E ratio of 10 indicates that an investor is willing to pay $10 for every $1 the share currently earns. The P/E ratio is a measure of investors’ beliefs about the company’s future earnings potential. A high ratio indicates investors have confidence in the company and expect significant growth in profitability. Therefore, they are willing to pay a higher price for shares. It might also indicate that the shares are overvalued in the marketplace, making it a good time to sell those shares. A decreasing ratio indicates declining investor confidence. The average P/E ratio over the past 80 years has ranged between 14 and 15. 4.2 Liquidity Ratios Liquidity ratios evaluate a company’s ability to pay its short-term debts as they come due. The ratios can be used within a company to track a business’s performance by comparing the ratios over periods of time. The ratios can also be used to assess a company’s performance compared with the performance of another company or compared with industry benchmarks. 4.2.1 Current Ratio

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

The Student Guide to the Case Method

54

Current assets are assets that are expected to be converted into cash, sold, or used up within one year of the organization’s financial statement date. Current liabilities are debts that are expected to be paid within one year of the organization’s financial statement date. The current ratio measures a company’s current assets against its current liabilities. A current ratio of 1.8 means that for every dollar of current liabilities, the business has $1.80 in current assets. A general rule of thumb is that this ratio should be at least 1.5 to 2.0, although as noted earlier, industry benchmarks always take precedence over general rules of thumb. 4.2.2 Acid Test Ratio (Quick Ratio)

The acid test ratio assesses a company’s ability to pay its current liabilities with short-term assets that can be quickly converted to cash. An acid test ratio of 0.9 means that for every dollar a company has in current liabilities, it has 90 cents in highly liquid assets to pay those current debts. As a rule of thumb, a minimum healthy ratio is 0.9 to 1.0. The current ratio and the acid test ratio both measure a business’s short-term ability to pay its current debts as they come due. However, the acid test ratio is a more accurate measure of liquidity because it excludes current assets that are not quickly turned into cash (e.g., inventory) or intended to be turned into cash (e.g., prepaid insurance and supplies). The inventory turnover and accounts receivable turnover ratios, discussed earlier as activity ratios (see Sections 4.1.6 and 4.1.7), are also liquidity ratios because a business’s ability to pay off its own current liabilities depends to a great extent on how quickly it can sell its inventory and, in turn, how quickly it can collect payment from its customers. For example, if days in inventory is 53 days and the collection period is 45 days, the business needs to wait a total of 98 days (days in inventory + collection period) before cash is available to pay its own suppliers and to pay other operating expenses. 4.3 Solvency Ratios 4.3.1 Debt Ratio

The debt to total assets ratio (also referred to as the debt ratio) measures the percentage of a business’s assets that are financed by creditors. The ratio indicates how heavily a business relies on debt financing. A ratio of 0.55 means that for every dollar of assets, 55 cents is financed by debt; or, expressed another way, 55 per cent of a business’s assets are financed by debt. The level of debt that a business can handle depends on its earnings. As well, more capital intensive industries generally use more debt financing. However, in general, as the percentage of debt to total assets increases, the risk also increases that the business may be unable to meet its maturing obligations and ongoing interest payments. In general, 0.60 to 0.70 is an acceptable level.

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

The Student Guide to the Case Method

55

4.3.2. Debt to Equity Ratio

The debt to equity (D/E) ratio is a variation of the debt ratio. Where the debt to total assets ratio measures how much of a company’s assets are financed by debt, the D/E ratio measures how much of a company’s debt is covered by shareholders’ equity (including retained earnings). A ratio of 0.7 means that for every dollar of shareholders’ equity, there is 70 cents in liabilities. A high D/E ratio usually means that a company is being aggressive in using debt financing to leverage growth. Both the debt to assets and debt to equity ratios are sometimes calculated using long-term liabilities instead of total liabilities. 4.3.3. Times Interest Earned

Where EBIT refers to earnings before interest and taxes.

The times interest earned ratio (also known as the interest coverage ratio) is one measure of a corporation’s ability to generate sufficient earnings to make interest payments as they come due. An acceptable range is typically 2.0 to 3.0, although, again, the suitability of this range varies by industry. 5. ASSESSING PROFITABILITY If you are asked to evaluate the profitability of a specific alternative course of action, your approach should depend on the level of detail provided in the case facts. A simple measure of profitability is to calculate the contribution margin (CM) of individual products.

Variable costs are those costs that vary directly, on a total basis, with increases or decreases in sales, such as labour or materials. As production volume increases, total variable costs increase proportionately; as production volume decreases, total variable costs decrease proportionately. Fixed costs are those costs that do not vary, on a total basis, with changes in sales; rather, they need to be paid regardless of the level of business activity. Total fixed costs remain the same, as long as sales fall within a relevant range of production. Examples of fixed costs include rent, insurance, utilities, and property taxes. Variable costs per unit do not change as production volume changes, while fixed costs per unit do change as production volume changes. You can calculate the contribution margin to compare the profitability of different services or products. Obviously, the larger the margin, the better for the company; but in any event, a positive contribution margin is required to help cover the fixed costs associated with production and distribution.

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

The Student Guide to the Case Method

56

Another simple measure of profitability is to calculate the gross profit margin (see Section 4.1.3). Contribution margin is the better measure of profitability for decision making purposes—especially because it can be used to perform break-even analysis—but it requires having sufficient information from the case to distinguish between variable and fixed costs. Calculating the gross profit does not require the same detail. Finally, if sufficient information is available in the case, pro forma (forecast) income statements should be prepared for each alternative course of action you are evaluating. 6. BREAK-EVEN ANALYSIS One of the most helpful management accounting tools for case analysis is break-even analysis. While the goal of a business is not to just break even (i.e., earn zero profit), knowing the break-even point for a specific product or a group of products helps to measure how risky a given new product venture might be. If expected sales do not exceed the break-even point, a business will need to reconsider the product’s price, find ways to reduce costs, or both.

A helpful variation on break-even analysis is to calculate the sales (in units or dollars) required to reach a target level of profit.

7. MARKET POTENTIAL AND MARKET SHARE Market potential (MP) is an estimate of the revenue a company can expect to make from a product or service it plans to market.

Where N = total number of customers P = average selling price Q = average annual consumption quantity MS = market share, which is the actual percentage of industry sales captured by a company

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

The Student Guide to the Case Method

57

8. SWOT ANALYSIS A SWOT analysis is an evaluation of the strengths (S), weaknesses (W), opportunities (O), and threats (T) faced by an organization. It is a popular tool for analyzing an organization’s internal and external environments to identify various issues. A SWOT analysis can also be used to generate pros and cons when evaluating alternative courses of action. Although strengths and weaknesses are listed first in the acronym, the assessment of opportunities and threats (i.e., the external analysis) is usually performed before the internal analysis. Opportunities represent conditions in the external environment that an organization can take advantage of (by formulating and implementing appropriate strategies) to enhance its competitiveness, profitability, and overall success. Opportunities should not be confused with alternatives. For example, an increase in the demand for dark chocolate because of its cancer-fighting antioxidants and heart-healthy properties represents an opportunity (a favourable environmental condition). To take advantage of this opportunity, a confectionery company might consider alternatives such as switching some of its milk chocolate production capacity to dark chocolate or acquiring a company that specializes in the manufacture of dark chocolate. Threats represent conditions in the external environment that endanger the competitiveness, profitability, and success of the organization. For example, the increasing incidence of obesity and diabetes pose threats to a confectionery company. Opportunities represent possibilities, while threats pose constraints. Both are conditions that are outside an organization’s control. Strengths are activities the organization does very well or characteristics that enhance its competitiveness. Strengths can be found in skills, expertise, physical assets, human assets, or competitive advantages. Weaknesses are activities the organization does poorly (compared with its competitors), resources it lacks, or internal conditions that make the organization vulnerable. These are areas that an organization can improve on; for example, a retail business is vulnerable if it does not have an online sales presence but its competitors do. 9. PESTLE ANALYSIS A PESTLE analysis (see Figure 1) identifies changes and trends in six segments of the general, societal, or macro environment: political (P), economic (E), socio-cultural (S), technological (T), legal (L), and environmental (E). The analysis is also variably referred to as PESTEL (or PEST analysis if only the first four factors are considered). It evaluates the potential impact of changes and trends in the environment on both the industry and the organization, considering how the changes and trends affect supply, demand, competition, and each element of the company’s value chain. A PESTLE analysis can be used as a stand-alone tool, or it can be used in conjunction with a SWOT analysis to enhance the thoroughness of external analysis by more methodically identifying opportunities and threats.

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

The Student Guide to the Case Method

58

Figure 1: PESTLE Analysis

Force Examples

Political Tariffs, trade agreements, and special interest groups that promote or oppose specific products (e.g., tobacco) or marketing practices (e.g., promotion of healthy body image)

Economic

Interest rates, inflation rates, stock market trends, unemployment rates, gross domestic product, productivity levels, disposable income levels, government deficits, monetary policies, tax policies

Socio-cultural

Society’s values, beliefs, attitudes, lifestyles, and demographics; e.g., having children later in life, desire to live in the suburbs, attitudes toward saving and investing, attitudes toward leisure and careers, desire for healthy lifestyle; gender, age, and income distribution; ethnic makeup; education levels

Technological developments

Developments that lead to new or improved products or services, and changes in how products are delivered and marketed; e.g., social media, computer-aided manufacturing, artificial materials

Legal Laws and regulations; e.g., competition, labour, taxation, intellectual property, product safety, corporate governance

Environmental Trends related to pollution, global warming, and sustainable development; e.g., recycling programs, packaging, energy conservation, and reforestation

In the body of a report, use PESTLE to identify only the most important external forces. For example, for an automobile manufacturer, the most relevant forces might be abandonment of free trade agreements (P); increasing interest rates for car loans (E); pressure to use rapid transit systems (S); development of self- driving cars (T); higher damage awards for product safety violations (L); and lower emissions requirements (E). If it adds value to your report, a more extensive description of external forces can be put in an appendix. 10. PORTER’S FIVE FORCES FRAMEWORK1 Porter’s five forces framework (see Figure 2) is used to evaluate five competitive forces that influence an industry’s profit potential or attractiveness, and to identify where economic profit lies in an industry’s value chain (see Section 133.1). A five forces analysis can also be used to identify specific opportunities and threats in the industry, such as introduction of a substitute product or increased competitive rivalry.

1 Michael E. Porter, “How Competitive Forces Shape Strategy,” Harvard Business Review, March 1979, 137–145; Michael E. Porter, “The Five Competitive Forces That Shape Strategy,” Harvard Business Review, January 2008, 57–71. Available from Ivey Publishing, product no. R0801E.

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

The Student Guide to the Case Method

59

Figure 2: Porter's Five Forces

The threat of new entrants increases when barriers to entry are low, for example, when  there are no economies of scale related to production, marketing, or distribution;  product differentiation is low, so new firms do not have to spend heavily on branding;  capital requirements are low, which makes entry into an industry less risky;  switching costs are low, so new firms do not need to offer major improvements to get a customer to

switch brands; or  firms have easy access to distribution channels. Intensity of industry rivalry increases, for example, when  the number of competitors increases;  competitors are equal in size and capability;  demand for the product is growing slowly; or  customers’ costs to switch brands are low. Threat of substitutes (products that provide similar benefits) is high, for example, when  the relative price of substitute products decreases; or  customer switching costs are low. Supplier power is high, for example, when  a supplier group is dominated by few companies;  the supplier group’s product is unique;  there are no or few substitute inputs; or  suppliers pose a credible threat of integrating forward into the organization’s business. Buyer power is high, for example, when  the buyer group is concentrated or buyers purchase in large volumes;  products purchased are undifferentiated;  buyers earn low profits, which creates pressure to lower purchasing costs; or  buyers pose a credible threat of integrating backward to make the organization’s product. In the body of a report, Porter’s five forces analysis should be used judiciously to highlight key forces that make an industry attractive or unattractive to enter. For example, in analyzing whether a restaurant should

Bargaining Power of Suppliers

Bargaining Power of Buyers

Threat of New Entrants

Intensity of Rivalry between Competing

Firms

Threat of Substitute Products

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

The Student Guide to the Case Method

60

expand into catering, an organization would encounter an unattractive industry characterized by high threat of new entrants (capital requirements are relatively low and product differentiation is hard to achieve); fierce rivalry (many restaurants are doing catering, and demand for catered meals is growing slowly); high supplier power (there are only a few commercial food service companies); high buyer power (there are many caterers for buyers to choose from, and often they offer the same type of food); and a moderately high threat of substitutes (going to a restaurant, cooking yourself). A more complete Porter’s five forces can be placed in an appendix, if you deem this to be value-added. 11. STAKEHOLDER ANALYSIS A stakeholder analysis identifies the relevant internal and external stakeholders (e.g., customers, shareholders, employees, distributors, suppliers, and the local community) and what they need or expect from an organization as it pertains to the dilemma under consideration. After identifying potential stakeholders and their interests, a company can either align its actions to meet the interests and needs of the stakeholders, or it can manage its relationships with stakeholders by addressing the consequences of the company’s actions on the stakeholders. A grid similar to that shown in Figure 7 for resource gap analysis can be used to summarize the existing preferences of various stakeholders, the new required preferences (i.e., to align with a particular alternative), major gaps between stakeholder expectations and corporate actions, and ways to reduce those gaps. 12. INDUSTRY KEY SUCCESS FACTORS Industry key success factors (KSFs) identify what a company needs to succeed or win in the industry. KSFs include product qualities, organizational capabilities, resources, and market achievements that combine to create value for customers and are critical for long-term competitive success in the industry. An industry usually has only two or three KSFs; rarely are there more than five or six. Identifying KSFs allows a company to assess its performance against industry KSFs. A company wants to perform well on all KSFs and be distinctively better on one or two to develop a competitive advantage. 13. VALUE CHAIN ANALYSIS 13.1. Industry Value Chain An industry value chain2 (see Figure 3) consists of the activities that contribute to the process of firms within an industry providing a valuable product or service. Most businesses buy products or supplies from another company, transform them, and then sell them to customers. Therefore, an industry value chain includes the firms’ own value chains as well as the value chains of their suppliers and distributors.

2 Based on Michael E. Porter, Competitive Advantage: Creating and Sustaining Superior Performance (New York, NY: Free Press, 1985).

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

The Student Guide to the Case Method

61

Figure 3: Industry Value Chain

13.2 Organization Value Chain An organization can use a value chain analysis to systematically identify its own capabilities and competitive advantages. Part of a sample value chain analysis for an organization is provided in Figure 4. The analysis is designed to evaluate the value chain of Birks Group, a Canadian jewellery company. Analyzing Birks’ value chain identifies where the company’s primary and supporting activities can be leveraged and integrated to add value and build an advantage over a competitor. Figure 4: Value Chain Analysis, Birks Group

Primary Activities

Operations Jewellery factory: making models of jewellery, casting metals, mounting and setting jewels, polishing completed jewellery Watch factory: limited reassembly and customization of watches

Outbound logistics Shipping of jewellery and watches

Marketing and sales 38 corporate stores in 15 Canadian markets

Service Polishing and repairing of jewellery and watches

Secondary Activities

Human resource management Internationally renowned, award-winning, in-house design team

Firm infrastructure Head office support by 62 managers in Montreal

Procurement Sourcing metal and jewels for jewellery Sourcing watch components for limited reassembly

14. COMPETITIVE POSITION MATRIX A competitive position matrix identifies competitive dimensions that add value and are important to the customer. Potential dimensions include price, delivery, price/quality mix, product/service characteristics, product/service scope, and geographical scope. The matrix uses these dimensions to compare the positions of competitors in an industry (see Figure 5). Competitors with similar characteristics and market positions can be grouped to make competitive analysis more manageable.

Inbound Logistics Operations Outbound

Logistics Marketing & Sales Service

Firm Infrastructure

Human Resource Management

Technology Development

Procurement

M argin

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

The Student Guide to the Case Method

62

Figure 5: Competitive Position Matrix, Canadian Furniture Retail

Geographical

Scope Price Relative

to Quality Selection

Service and Delivery

IKEA National, in urban centres Low to moderate Low—only knock-

down furniture

Low—consumers transport and assemble

The Brick National Low to moderate High Moderate—includes financing

Hudson’s Bay (Home Outfitters) National Low to moderate Moderate to high Moderate to high

Independents Local Moderate to High Low to high High

15. STRATEGIC CLUSTER MAP A strategic cluster map (or strategic group map) provides a convenient visualization of the competitive position of various firms in the industry, but the map limits the choice of competitive dimensions to two (see Figure 6).

Figure 6: Strategic Cluster Map, Canadian Furniture Retail

16. RESOURCE GAP ANALYSIS A resource gap analysis identifies an organization’s major gaps in resources and skills. It can be used to analyze issues and to develop the pros and cons for alternative courses of action. In Figure 7, a partially completed template for a resource-gap analysis identifies gaps in a university’s ability to serve adult learners through a continuing education program.

National Chains (e.g., Hudson’s Bay)

Discount Furniture Chains (e.g., Leon’s, The Brick)

Local Specialty Stores

IKEA (knock- down Euro- styled)

Local Antique Stores

High

Low

Full-Line Mass Merchandiser Full-Line Specialty

Width of Product Line, Range of Merchandise Mix

P ri

ce R

el at

iv e

to Q

u al

it y

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

The Student Guide to the Case Method

63

Figure 7: Resource Gap Analysis

Resource Category

Required Resources

Available Resources

Resource Gaps Ways to Reduce Resource Gaps

Human Resources Course instructors

Existing full-time and part-time faculty; alumni with experience in a variety of fields

Instructors who have experience with adult learners

Hire and train instructors

Operations Curriculum Existing courses

Material tailored to an adult audience with on-the-job experience

Have faculty adjust existing course material; have faculty develop new course material

17. CORE COMPETENCIES Core competencies are skills and capabilities that an organization uses exceptionally well, such as developing curriculum for a diverse audience or delivering instructional content using user-friendly online platforms. Analysis of an organization’s core competencies can be used to identify strengths, as part of a SWOT analysis. When core competencies involve competitively important value chain activities, the competencies can evolve into competitive advantages. 18. COMPETITIVE ADVANTAGE ANALYSIS: VRIO3 The VRIO framework developed by Jay Barney suggests that resources and capabilities may offer a competitive advantage if they are valuable (V), rare (R), and inimitable (I) (i.e., difficult to imitate), and the firm is organized (O) to capitalize on those resources and capabilities. Resources are valuable if they contribute to meeting customers’ needs at the price that customers are willing to pay. Resources are also valuable if they enable a company to develop alternatives to exploit opportunities, mitigate threats, and improve efficiency or effectiveness. Resources and capabilities are rare if only a few competing firms possess them. Resources and capabilities are inimitable if they are costly and difficult to imitate. Resources could be inimitable because they are physically unique; have been built up over time based on specific experiences (e.g., unique historical conditions); result from interpersonal relationships, group norms, or culture (social complexity); or because it is difficult to identify the resource, its value, or its competitive advantages (causal ambiguity). Finally, resources and capabilities provide a competitive advantage only if the firm is organized—that is, the firm has the necessary structure, such as the appropriate employees, management, organization, control systems, reward systems, and culture—to capitalize on its resources and capabilities. 3 Jay Barney, “Firm Resources and Sustained Competitive Advantage,” Journal of Management 17, no. 1 (1991): 99–120.

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

The Student Guide to the Case Method

64

19. CASE ANALYSIS AND ACADEMIC INTEGRITY Because case analysis is complex, it may often seem helpful to discuss the case informally or formally with other students before participating in a class discussion, writing a report, or making a presentation. Managers and consultants often discuss problems with other people, within the constraints allowed by confidentiality. Therefore, your instructor may allow, encourage, or even require such discussion. However, to ensure academic integrity and to avoid plagiarism, unless your instructor has specifically indicated that some degree of discussion is permissible, you should consult with your instructor before engaging in any collaboration. This restriction on outside discussion is especially necessary when preparing reports and presentations. It may also seem helpful to search the Internet for teaching notes for cases or for case reports or slide presentations prepared by other students. Academic integrity requires that you refrain from using such resources, in full or in part. Any attempt to use the work of others and to pass it off as your own is plagiarism. If the instructor is suspicious that plagiarism might be involved, you may be asked to upload a copy of your case report through Turnitin.com. While using the work of others may appear to provide a shortcut to a good grade, the quality of online sources and the work of other students is often suspect, at best. Most importantly, you deprive yourself of the learning opportunities the case method offers.

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

,

W13649

SOGETI’S TEAMPARK — DESIGNING INTELLIGENT ORGANIZATIONS FOR THE FUTURE Veena Vohra, Manjari Srivastava and Sharon Pande wrote this case solely to provide material for class discussion. The authors do not intend to illustrate either effective or ineffective handling of a managerial situation. The authors may have disguised certain names and other identifying information to protect confidentiality. This publication may not be transmitted, photocopied, digitized or otherwise reproduced in any form or by any means without the permission of the copyright holder. Reproduction of this material is not covered under authorization by any reproduction rights organization. To order copies or request permission to reproduce materials, contact Ivey Publishing, Ivey Business School, Western University, London, Ontario, Canada, N6G 0N1; (t) 519.661.3208; (e) [email protected]; www.iveycases.com. Copyright © 2014, Richard Ivey School of Business Foundation Version: 2014-03-25

This is the dawn of a new beginning. We are building a future Sogeti in which collaboration and social networking are key for delivering client solutions faster, connecting the right people, wherever they are, and making Sogeti, as a group, a more attractive employer. Innovation and passion for technology will thrive and grow on TeamPark, a collaboration platform that has been developed to meet the needs of our people.

Michiel Boreel, chief technical officer, Sogeti Group

INTRODUCTION In December 2010, the management at Sogeti faced a dilemma in regard to their newly established TeamPark platform. TeamPark was developed to serve as an online, collaboration enabling tool for Sogeti’s global workforce. Founded by Serge Kampf in 1967, Sogeti – a wholly owned subsidiary of Capgemini S.A., with headquarters in Paris, France – was a global leader in providing professional technology services to its clients,1 especially in the areas of application management, infrastructure management, high-tech engineering and testing. Sogeti’s name was an acronym for “Société pour la gestion et le traitement de l’information,” which meant “business management and information processing company.” By the end of 2010, Sogeti employed approximately 20,000 people in 15 countries,2 in around 200 locations across Europe, the United States and India, with revenue of €1,649 million. As a result of working in a project based environment, the employees became increasingly disconnected from Sogeti’s culture. To overcome this trend, in 2009, Sogeti embraced a new social collaboration platform called TeamPark. The TeamPark platform challenged traditional work practices in favour of a culture of innovation and collaboration that connected the global workforce of Sogeti, enabling the free- flow of ideas. Sogeti consultants used the term Intelligent Organization to describe the living, organic

1 www.sogeti.com, accessed September 15, 2013. 2 These countries were Belgium, Denmark, Finland, France, Germany, India, Ireland, Luxemburg, the Netherlands, Norway, Spain, Sweden, Switzerland, the United Kingdom and the United States; www.sogeti.com, accessed September 15, 2013.

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

Page 2 9B13C047 dimension they wanted to achieve as a supplement to the bureaucratic structure of the organization. This would allow employees to function together in a stigmergic environment.3 Such an environment would facilitate the self-perpetuating exchange of ideas enabling employees to work together, independently of each other and without direct communication. In such an environment direct control was unnecessary. The processes in a stigmergic environment discouraged direct, person-to-person, or station-to-station communication, thus most of the communication or collaboration occurred by means of a social platform (see Exhibits 1 and 2).These new work practices enabled Sogeti to better utilize the special talents and ideas of its employees. Towards the end of 2010, Sogeti’s management faced various dilemmas concerning TeamPark. They had to increasingly deal with issues of trust, access and data security. For Sogeti, being close to clients and providing them with the best technology was an important part of their vision (see Exhibit 3). This led them to wonder how they could open up TeamPark to include clients and external stakeholders. This move would enable the development of a collaborative ecosystem, but would also lead to significant data security concerns. On the other hand, the Super Mentors team was responsible for increasing the usage of TeamPark among employees. They wondered if their approach was right and if it in fact was a good way to build an Intelligent Organization. Transforming Sogeti into an Intelligent Organization was critical as it would enable the organization to meet future challenges. IDENTIFYING A NEED In 2008, Sogeti was poised to undergo an organization-wide business transformation.4 Luc-François Salvador, chairman and chief executive officer (CEO) of the Sogeti Group, had come to the conclusion that, in order to prepare Sogeti for the future, the organization would have to transform the way it functioned. Most of its employees worked on scheduled teams to complete projects, and Salvador knew that, in terms of their geographic location and job function, several of his employees felt they were operating in silos, a sentiment that was leading to a slow but sure disconnect from the Sogeti culture and organization. In order to counter this situation, Sogeti’s management launched a successful collaboration tool and platform called TeamPark, which energized the social side of Sogeti. Salvador knew that before 2008 Sogeti’s culture had been largely entrepreneurial, with the firm positioning itself as a local professional services company (see Exhibit 3). The company brand name and culture were extremely strong, and when it came to operations at the local levels, a lot of decentralization existed. This duality worked advantageously for Sogeti since this structure and culture spurred the growth of Sogeti offices worldwide as entrepreneurial entities, while also creating a multicultural environment. Transforming Sogeti for the future would require a total metamorphosis of the organization, one that focused on the company’s values and mission, and this metamorphosis would necessitate a change in the way the employees worked with each other and with clients. Salvador perceived a need to create a variety of information technology (IT) initiatives, which, amongst other things, would create a stronger connection between management and employees. There existed a strong need to cut across the various teams and enable collaboration on various fronts, and to that end, Sogeti sought to invest in a social collaboration platform that would connect its employees on a global basis. The objective was to achieve business transformation by leveraging social collaboration mechanisms. In this way, the management team at Sogeti expected to shape some new workplace

3 Stigmergic Collaboration: The Evolution of Group Work, http://journal.media-culture.org.au/0605/03-elliott.php, accessed March 10, 2014. 4 www.sogeti.com, accessed September 15, 2013.

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

Page 3 9B13C047 behaviours and move away from its comfort zones to adopt new approaches and concepts, all while maintaining efficiencies and productivity across a 20,000-employee-strong, multilocational organization. Sogeti chose to involve its employees in this fascinating journey and, as a first step, launched a brainstorming session called the Innovation Jam, which revealed a need among Sogeti employees to break the boundaries of their silos and work more collaboratively. THE INNOVATION JAM In April 2008, Sogeti reached out to employees across its offices throughout the world, inviting them to participate in a brainstorming process that was referred to as the “Innovation Jam.”5 Employees were asked to contribute by generating, discussing and evaluating ideas that focused on four key themes: 1. Sogeti’s People: how to collaborate more efficiently. 2. Sogeti’s Clients: how to build new and closer relationships. 3. Technology: how to use new technology and create new services and strong partnerships. 4. Corporate Social Responsibility: how to contribute to make the world a better place. The idea was to engage people throughout the length and breadth of the organization and leverage crowd sourcing. The Innovation Jam, an online brainstorming session, was hosted on IBM’s Web 2.0 platform, and it allowed employees across geographies and time zones to contribute and share ideas about Sogeti’s future over the next five years. Around 4,220 participants made use of a 72-hour window for “live” participation, generating 1,971 ideas, 3,478 comments, 12,045 ratings and 70,361 views. The ideas that poured in were carefully examined and subsequently categorized into four predominant themes. The Innovation Jam resulted in a number of important discoveries — one of which was that employees felt the need to share their business experiences and viewpoints with each other. They also thought it was important to be able to seek expertise within their globally extended family, in addition to engaging in debates on professional aspects. One of the dominant themes concerned the undertaking of initiatives to tap the existing expertise within the organization in a collaborative fashion for client projects, a process that would enable Sogeti to become more agile and responsive to changing market needs as well as competition. As a result of the Innovation Jam, it became very apparent that people wanted more communication across the various silos within the organization. They wanted more interaction not necessarily related only to their work. Senior employees with ownership of the Innovation Jam — called “Sponsors” — took these ideas under advisement and began to give a concrete shape to this broadly felt need. The Sponsors soon recognized that a platform for collaboration had to be developed along the principles of self-management, trust and openness. The key was to establish a people-centric collaboration platform that would induce innovation and create value for clients as well. Twelve-year Sogeti veteran Jean Marc Gaultier, senior vice-president and global IBM alliance leader at Sogeti USA, served as one of the Sponsors. In describing the Innovation Jam experience, Gaultier recollected that, at first, the explicit design of the platform was unclear, but the team was certain about one thing: Web 2.0 technology should be used to build this platform.

5 Ibid.

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

Page 4 9B13C047 TEAMPARK IS BORN

In January 2009, a regular weekly meeting of the innovation consultants from Sogeti and the Innovatie (Innovate) and Inspiratie (Inspire) team was held. The meeting centred on a discussion of a customer’s request for a session on Web 2.0 and its impact on existing organizations. During the course of their dialogue, the members of the innovation team suddenly realized that, in response to the needs that staff members had expressed during Innovation Jam, Web 2.0 offered an ideal platform on which to build a successful social software solution for Sogeti. This meeting was immediately succeeded by a couple of brainstorming sessions, mind maps and inspirations that enabled the team members to finalize their design and surprisingly conclude that, although the ingredients for building a social software solution for an enterprise were already available on the Net in some form or the other, no one had yet recognized the potential that could be gained from combining them. In the tradition of a large-scale systems change, this social software tool, known as “TeamPark,” was unveiled to the employees in phases. For Sogeti, TeamPark also became a methodology by which to create an explicit and addressable community from every group inside the company. The social platform would support global communication and collaboration, thus resulting in open innovation, solutions outside the current boundaries, and socializing. Several things were kept in mind while building TeamPark. One of these included mapping various activities of the employees to know what was happening inside Sogeti. After that it was important to identify various categories of employees within the organization and give them an identity. Also kept in mind were understanding relationships with peers, making note of the different types of groups or communities present in Sogeti’s environment, and making an assessment of their contributions. TeamPark was built by paying attention to whether people shared content, identifying people who communicated and understanding issues that people had with challenges or non-knowledge-related activities. Sogeti was one of the first companies in the world to use the updated version of the powerful collaboration platform from IBM, based upon IBM Connections and Microsoft Office Communicator + Intelligent Application Gateway, thus making the best use of both collaborations. In the future, this platform would also integrate Microsoft SharePoint.6 IBM Connections — essentially a social software for business — allowed dynamic networks of people such as co-workers, clients and partners to work together innovatively. Using features like communities, blogs and activities, relationships within and outside the organization could be set up in a trustworthy manner while also keeping business information safe.

Our people are our most valuable asset. As a multinational company with 20,000 employees dispersed from India to the United States, we needed a powerful tool to connect our people and provide them with a social platform to share information and collaborate. We chose IBM Connections because it is a powerful collaboration platform that goes way beyond simple sharing of documents and furthermore, it is people-centric rather than project or document-centric. We believe that this is the future of collaboration and we are pleased to be at the forefront of this new trend.7

The IBM and Sogeti development teams worked closely to develop a software program that had all the features Sogeti employees wanted and more. Flavien Boucher, the technical project manager for

6 Ibid. 7 Ibid.

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

Page 5 9B13C047 TeamPark, focused on technological development and integration to ensure that all aspects of the platform would work. He engaged heavily with IBM reviews and remained in constant contact with offices in different countries, stating that, “Change management initiative was the objective. People depend on people, and although there were some cross-country issues, we finally resolved most of the technical issues.” THE TEAMPARK METHOD: A FOUR-PHASE APPROACH The Sogeti Innovation team envisioned a four-step process for the development and implementation of TeamPark: creating awareness, determining strategy, implementing the platform, and bringing the platform to life. An important part of the strategy involved the determination of the scale and the degree to which the organization had to establish a process to “socialize” itself. The four-phase approach (see Exhibit 4) was thus enacted to set up and introduce TeamPark to Sogeti employees. Phase I — Creating Awareness The Sogeti TeamPark team knew that, with respect to the TeamPark initiative, the fundamental inertia of large organizations could certainly arise in response to such large-scale changes, in turn inhibiting their success. To counter this phenomenon, the implementation team strove to create social awareness about TeamPark in the form of training sessions, workshops and inspiration sessions. This effort was complemented by an organization-wide public relations campaign that enhanced awareness of the different ways of working together and managing collaboration. Managers and executives were trained to adopt a new role within the living organization. Fitting into these new roles was important since management would no longer occur by means of direct instruction, modification of job profiles, processes and key performance indicators, but instead by adapting to the framework of the platform. In fact, an employee’s status in the organic sphere would be based purely on the value of his or her contributions to the TeamPark community. This phase was all about inspiring, informing, spreading, discussing and demonstrating. Some of the key tasks in the awareness-creating phase included getting inspired and forming a vision, assessing technological and cultural/political trends, creating broad support and willingness, and establishing commitment (see Exhibit 5). Phase II — Determining Strategy This phase focused on analyzing, planning, determining, estimating and creating. Some of the key tasks initiated in this phase included analyzing processes, analyzing the workforce, establishing goals and key performance indicators, planning and roadmapping, analyzing potential and assessing impact. A workforce analysis was carried out to ascertain the communication and collaboration practices of the employees and the extent to which they would adapt to the new concepts and media tools. Since performances on the social platform would be measured differently than those observed on the functional side of the organization, the TeamPark team established some new measurements and key performance indicators (KPIs) for the social sphere (see Exhibit 6).

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

Page 6 9B13C047 Phase III — Implementation In this phase, the platform was built, configured, installed and tested. All the infrastructural adjustments were performed, existing components were integrated, and everything was readied for the actual launch. Resembling a typical IT project, this phase looked at the redesign of processes and structures for successful adaptation in a different environment; the migration and preparation of content also took place at this point. Further, moderators, floor-walkers and future catalysts received their training during this phase. Sogeti first rolled out TeamPark in a pilot run to around 100 people in three countries. The users faced many difficulties in using the platform, and these issues were painstakingly resolved by the Sogeti IBM team. The initial challenges faced during the launch phase mostly involved errors and slow response time due to server issues. Although the problems in this phase could have become a larger threat to the implementation, and could have snowballed into a crisis, the team managed to resolve them in two to three weeks. As the technical project manager, Boucher faced numerous challenges in coordinating the roll-out of TeamPark to the various Sogeti offices worldwide. The first few weeks saw challenges related to numerous bugs and to system crashes that were caused by multiple simultaneous users, all of which lead Boucher to wonder whether the final version should have been directly launched across the entire family of Sogeti offices instead of launching the beta version, which posed numerous technical problems. Initially, employees were stimulated to use the platform for their personal interests. However, Sogeti viewed the platform as a business resource, and people were taught how to make commercial use of it through cases and scenarios. Initial measurements of usage and updating of the KPIs in this stage also provided useful data for the implementation team (see Exhibit 7). Phase IV — Bringing the Platform to Life The final and most vital phase was to bring the platform to life. This phase emphasized the practices of demonstration, cultivation, stimulation, moderation and measurement. The official roll-out of the TeamPark platform took place in October 2009, and, as the chairman of Sogeti, Salvador played a crucial role in communicating the significance of a social collaboration platform such as TeamPark to the future of the organization, its competitiveness and the way that its work practices would be transformed. This clarification helped to position TeamPark appropriately in the minds of the staff. Within three weeks of the launch, many out of the 20,000 Sogeti employees were on board with TeamPark. They had participated in the Innovation Jam, contributing ideas and discussing the future of their workplace, and they saw themselves as co-owners of TeamPark (see Exhibit 8). Sogeti employees quickly started connecting with each other and creating interest-based communities. TeamPark became integrated with Twitter and Facebook and saw regular postings by employees. The social networking aspect served the dual purpose of enabling knowledge transfer and creating a healthy environment for challenging of views and opinions. The key to the successful adoption of TeamPark by Sogeti employees stemmed from searching for early adopters — employees who were active users of LinkedIn and Twitter, and people who were interested in blogging. These early adopters primarily came from middle management and the field, and they actively sought to initiate others into the online experience. The early adopters acted as catalysts and became responsible for the success of the “Put it on TeamPark” movement.

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

Page 7 9B13C047 Sogeti USA’s Robert Leroy, senior vice-president — IBM Technology Services, was one such early adopter within the TeamPark story. Leroy was identified as an early adopter because he had participated in creating the technology blog at Sogeti. He had actively participated in the Innovation Jam, and he described the initial phases as a “painful” experience. Leroy remembers being part of the small group of people who were trying to roll out the platform. Initially, a lot of confusion existed around the issue of why employees should use TeamPark. The challenge was, as Leroy recollected “If a message is sent by e-mail, it may eventually die. But putting it on TeamPark helps it to live longer and enables immense collaboration resulting in numerous benefits.” Leroy related a story of how a salesman in Chicago was looking for particular software for a client and contacted Leroy for help. Leroy asked his team to post an inquiry about the product on TeamPark, and within a short time, the Sogeti staff discovered a vendor in Seattle who had listed this software on his TeamPark profile. The Sogeti team was quickly able to put the Chicago-based salesman in touch with the Seattle-based vendor. A schedule with detailed timelines and milestones was followed as a way to encourage the use of TeamPark across Sogeti, which was a widely geographically dispersed organization (see Exhibit 9). THE TRANSFORMATION OF SOGETI Wim Hofland, who was responsible for small and medium business enterprise (SME) apps, collaboration and user experience at Sogeti, said that, “An important need was to change the behaviours of the people and their social mindset. All our efforts were focused around creating awareness about the possibilities of the platform, and that is why the fourth phase was also the longest one.” Several norms had to be put into place and evolved so that the crowd behaviour could be optimized. People who started a community (called Community Owners) owned the community, thus doing away with the need for a regulator. Norms for Community Owners were set up to encourage the use of proper manners and the maintenance of good order on the platform. Erik Van Ommeren, director of innovation at Sogeti, pointed out that the platform had to be free and would have no moderation of content whatsoever. While this mandate would represent a challenge for even the most open of organizational cultures, this did not seem to be the case at Sogeti. For example, within the very first week of TeamPark’s launch, an employee’s post making a contentious accusation resulted in numerous posts by the author’s peer group, admonishing such content and asking members to be restrictive with controversial postings. The TeamPark administrative team never had to resort to an escalation procedure in order to tackle issues of postings that might be controversial in nature. Although Sogeti was a pioneer in adopting social collaboration platforms, Van Ommeren was quick to point out that “success comes with practice and technical expertise.” The TeamPark experience served to educate the company as a whole, with very few downsides to the overall experience. TeamPark enabled Sogeti employees to locate and connect with the right person within the global group, wherever their location, to discuss certain parameters, such as work experience, interests, professional position, etc.8 The platform presented quite a few social networking tools to share knowledge and collaborate virtually with respect to technology, services and also clients. It presented tools such as a personal profile, communities, blogs, wikis, discussion forums, file share, bookmarks and activities. It was designed to be a people-centric system with a high level of functionality and it gradually established its superiority to other document- or project-centric systems in the market.

8 Ibid.

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

Page 8 9B13C047 Employees using TeamPark found that the system enhanced internal communication, and TeamPark soon became a source of quick and free innovative ideas. A post on TeamPark requesting help with an advertisement for a branded beverage product received 27 valuable replies in three days — considerably more/faster responses than the usual modes of communication and idea-generation. TeamPark became a discussion ground amongst experts and people interested in a given topic. It also became a tool to quickly reach out to people who would previously have been inaccessible, such as higher management personnel or experts in other locations. Thus, TeamPark became a valuable tool for accessing dispersed information or knowledge. Top management used TeamPark on an exclusive basis to make important announcements. Posts of an achievement by an employee immediately evoked appreciation and congratulatory messages across teams and management levels, thereby slowly establishing a move towards a collaboration-based, open culture that was unfettered by hierarchy or governance. Besides helping people to efficiently cut across their own projects or departments, TeamPark also helped them to connect with those having similar interests in other projects. Before TeamPark, employees working out of client sites had limited interaction with the home office. However after TeamPark came into existence, the engagement levels increased, effectively putting a halt to the dissatisfaction and possible attrition amongst such employee groups. KEEPING THE SOCIAL SIDE OF SOGETI VITALIZED — THE TEAM BEHIND IT ALL A team of Super Mentors was formed to create awareness about TeamPark and to encourage people to increase their use of the new platform. Sogeti’s Sweden-based community manager, Lucile Leclercq, was asked to head up this team in order to provide useful data and reports to all TeamPark users on a regular basis. From Leclercq, the Super Mentors received updates concerning all the country-wise norms of the platform’s new users, as well as percentage increases in usage and daily usage reports indicating increases/drops. The steering team that looked after the implementation of TeamPark included Leclercq in Sweden, Nitin Ghate in India, secretary general Olivier Lepick, chief financial officer Laurent Llavall, project manager Nadine Jacrot, group director of marketing and communication Therese Sinter, and Pierre-Edouard Serlooten, Sogeti’s global IT manager. Every country had a single point of contact. Leclercq was responsible for building communication material to increase awareness about TeamPark and to enable an increase in its adoption. She drove the evolution of TeamPark by using newsletters and presentations to reach out to people in a continuous effort to create communities out of local users. Leclercq actively promoted community management on TeamPark, and she increased community spirit by pushing people towards building and using the network, guiding them towards going online more frequently. By constantly standing on the platform, interacting with the users, providing them with functionalities and resource options, Leclercq slowly shaped new behaviours among the Sogeti users. She also worked with management to create appropriate responses to discussions that reflected tensions, unanswered questions or worries from groups of employees. Another important part of Leclercq’s role revolved the training of the Sogeti consultants and the various department managers (human resources, legal, finance, sales and marketing, communications) on how to be social leaders. Her job was to create an understanding of why there should not be official leaders on a social collaboration platform, and to that end, her training focused on sharing more knowledge on the platform and demonstrating how to answer questions concerning TeamPark, especially with respect to handling sensitive situations and the rules of openness and transparency online. Leclercq conducted several different types of workshops; for example, she conducted a workshop in Brussels for the legal

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

Page 9 9B13C047 team to help them scan the tool in order to foresee and forestall any potential crises that might arise during TeamPark’s usage. The third major aspect of Leclercq’s role involved the strategic positioning of TeamPark. She was responsible for creating awareness about TeamPark at the international level and for driving an image of TeamPark as the centre of how work was done at Sogeti. She undertook initiatives to position TeamPark at the heart of communication and collaboration mechanisms, and these initiatives took the form of communication, such as presentations about adoption and implementation of TeamPark during client events, meetings or workshops. Leclercq’s role also required her to be active on social media in order to gain access to worldwide experts and insights on the latest innovations and adoption techniques in the field. Leclercq undertook this role at Sogeti at a time when there was no dedicated person working on the TeamPark project. The management initially took a “wait and see” approach, and one of Leclercq’s initial challenges involved bringing the management team on board with the change initiative. Leclercq also found that the change initiative faced political resistance from employees who were reluctant to adopt an IBM product due to their comfort level with Microsoft products. Additionally, the strong local culture prevented employees from realizing a corporate need to collaborate globally. Adoption of TeamPark also faced resistance due to the attitude, “If I share my knowledge, I will no longer be valuable.” This situation required a great push from the management team to show to the organization why Sogeti needed TeamPark. Leclercq observed that new users primarily relied on colleagues to start using TeamPark. She focused the bulk of her efforts on countries where the usage rates were quite low, adopting a personal, positive, and extremely encouraging (never patronizing) tone with the users. She also focused on providing them with options of resources and communities to improve their usage patterns and behaviours. CHALLENGES AND OPPORTUNITIES By December 2010, a full year after the launch of the TeamPark software platform, Sogeti’s global management team sat down to assess the tool’s effectiveness on a company-wide basis. The central post- implementation challenge for Sogeti was to increase engagement levels with all employees. The Sponsors wondered, “How do we open this platform up to clients,” in addition to “How do we increase the usage and utilization?” There was a lot of deliberation around the way the community should be created, mainly, should it be restricted or open? For Sogeti, the business angle of this dilemma was “How do we build a collaboration platform for our clients?” Underlying these concerns were the vision and values that Sogeti stood for — openness, transparency, and empowerment — values that had long been actively practiced at Sogeti but that now raised concerns regarding sharing of sensitive internal information with the outside world. As a user of TeamPark, Leroy found himself jumping from e-mail to Twitter to Facebook to blogs. Switching between these applications sometimes took away the focus from the context and supplied him with a lot of information he did not need. With many TeamPark users feeling the same way, Sogeti began to work with IBM for a single consolidated position/location creation. The social challenges delivered an added dimension of culture shock at Sogeti. While employees used TeamPark to speak their minds, in some cases, the managers were not very happy with this situation, since it sometimes reflected on their own performance.

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

Page 10 9B13C047 With TeamPark platform becoming tied to the vision of Sogeti, employees developed a new way to carry out day-to-day business, manage knowledge and engage in these collaborative activities in a passionate manner; however, some managers feared the employees might be spending too much time on TeamPark. The pressure was also on IBM to continue to add features and make TeamPark robust, especially with the competition starting to catch up. LeRoy worked with Sogeti’s clients to help them understand the benefits of building a social collaboration platform in order to transform into an Intelligent Organization (see Exhibit 10). This work entailed developing the “Proof of Concept” for the clients to enable them to see how this technology could be beneficial for them. A pilot run was carried out with the clients by encouraging people to use this platform and generate content. When new users saw life on the platform, they became attracted to it, thus increasing the size of the community. Access and security issues continued to dominate the canvas for TeamPark. Leroy shared that, as an owner of a community whose size continued to grow, he felt a bit uncomfortable with complete strangers joining the community. Such Community Owners could experience pangs of anxiety when they refused membership to these people. The Sogeti TeamPark team continued to work out ways to address these areas of concern. Should they open up the platform to clients and external stakeholders? If so, how would the principles of self- moderation work with larger crowds and communities? Above all, how should the issues of security and trust and openness be resolved in an Intelligent Organization?

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

Page 11 9B13C047

EXHIBIT 1: FROM WEB 2.0 TO SOCIAL NETWORKING

Source: P. Savalle, W. Hofland, A. Brugman, “TeamPark Platform and Method.” 2nd (Revised) edition, 2010. Used with permission.

EXHIBIT 2: SOCIAL PLATFORM

Source: P. Savalle, W. Hofland, A. Brugman, “TeamPark Platform and Method.” 2nd (Revised) edition, 2010. Used with permission.

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

Page 12 9B13C047

EXHIBIT 3: SOGETI’S MISSION, VISION STATEMENT AND DNA

Our Mission and Vision For Sogeti, clients and employees come first! Our mission is to be a leading provider of professional technology services. Our vision is to be perceived as the best supplier on each local market. “Year after year Sogeti is delivering client satisfaction at a level that positions the company among the best of the best in our markets and our competitors. The success of Sogeti is the reflection of the trust that our clients are granting us and the result of the dedication of our employees. At Sogeti, we are passionate about two simple but wonderful things: clients and technology. You can be sure that Sogeti will continue to cherish these two pillars of our ‘raison d’être.’ Being close to our clients and providing them with the best of what technology can bring will continue to be at the very heart of Sogeti’s mission.”

Luc-François Salvador, Chairman and CEO of Sogeti Group Our DNA Our DNA, are as a supplier, a partner or an employer can be described in a few words: Technology Excellence Team Spirit Reliability Pride and Passion Result-driven Simplicity Proximity and Intimacy Fun Real comments, from real people: Technology Excellence “Technology has never been more exciting than today. IT and technology have really found their way into the core of the business. And all of this moves faster and faster.”

Andreas Sjöström, Sogeti Sweden Team Spirit “Sogeti is like a village. You’ll never walk alone.”

Geert Dreuning, Sogeti Netherlands Reliability “The great thing about Sogeti is that it has a whole network of specialists to fall back on. If things really get complicated, Sogeti always has an expert at its disposal — somewhere!”

Wim Vliegenthart. International Card Services, Netherlands

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

Page 13 9B13C047

EXHIBIT 3 (CONTINUED)

Pride and Passion “Being engaged is very important to me. Whatever I am able to accomplish and succeed at is only due to the feedback I get. What is the value I bring to the relationship? If I am not bringing value I simply won’t do it. I am pretty blunt about that.”

Rick Meador, Sogeti USA

Result-driven “Sogeti has a similar awareness of the need for quality and service which in turn has a stimulating effect on us. We do not have to convince each other that clients are our core business.”

Wim Vliegenthart. International Card Services, Netherlands Simplicity “But the key aspect was that we were pragmatic; we looked at the challenges and adapted where necessary. The result was that it became one of the group’s success stories.”

Edwin D’Hondt, Umicore, Belgium Proximity and Intimacy “We really feel we can talk to people at Sogeti and that we’ll end up finding the solution we’re looking for — together. That has been the case from day one onwards, and our relationship has only become closer.”

Wim Vliegenthart. International Card Services, Netherlands Fun “For me, in my professional life at Sogeti, my career is not the typical ladder, but instead it’s more like a chessboard or a labyrinth, where the next move is not necessarily moving upwards, but striving towards fulfilling a passion. That is where the fun begins.”

Andreas Sjöström, Sogeti Sweden

Source: Company files.

EXHIBIT 4: THE FOUR PHASES OF TEAMPARK

Source: Company files.

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

Page 14 9B13C047

EXHIBIT 5: PHASE 1 — CREATING AWARENESS

Source: P. Savalle, W. Hofland, A. Brugman, “TeamPark Platform and Method.” 2nd (Revised) edition, 2010. Used with permission.

EXHIBIT 6: PHASE 2-— DETERMINING STRATEGY

Source: P. Savalle, W. Hofland, A. Brugman, “TeamPark Platform and Method.” 2nd (Revised) edition, 2010. Used with permission.

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

Page 15 9B13C047

EXHIBIT 7: PHASE 3 — IMPLEMENTATION

Source: P. Savalle, W. Hofland, A. Brugman, “TeamPark Platform and Method.” 2nd (Revised) edition, 2010. Used with permission.

EXHIBIT 8: PHASE 4 — BRINGING THE PLATFORM TO LIFE

Source: P. Savalle, W. Hofland, A. Brugman, “TeamPark Platform and Method.” 2nd (Revised) edition, 2010. Used with permission.

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

Page 16 9B13C047

EXHIBIT 9: TIMELINESS AND MILESTONES

Timeline and Milestones

Source: Company files.

04/08

09/08 12/08 10 01/09 01/09

04/09 06 09

10 11/09

Go Live

12/09

Board decision For Social platform

Environment Ready

Innovation JAM

Innovation Factory

Proof of concept

Implement platform

IAG Test, OCS, Integration

Prepare roll -out

Catalyst Phase 1

Catalyst Phase 2

Graphic Guidelines Definition Identity foundations Development of the platform Catalyst Recruitment Catalyst Mission and objectives

Profiles & Blogs Communities and Wiki Activities Widgets

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.

Page 17 9B13C047

EXHIBIT 10: HOW TO BUILD INTELLIGENT ORGANIZATIONS

Source: Company files.

germ

wishes, talents, habits, duties, (im)possibilities

Building block, concepts, technology, (im)impossibilities

Misplaced underperforming and modern social processes, social hubs

1. Make inventory of the wishes, talents, social communication on collaboration habits and (im)possibilities of your employees. 2. Identify the misplaced, underperforming and hidden social processes and the social hubs in your current functional organization. 3. Select or construct social concepts and means which fill your people and procession and bring them alive.

For the exclusive use of M. Corella Zelaya, 2024.

This document is authorized for use only by Mariana Corella Zelaya in MIS_520_Summer_6_Tomblin taught by Michael Tomblin, Westcliff University from Jul 2024 to Aug 2024.